Oil seperator / catch can for the R

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ledbetterjw

Member
Joined
Aug 26, 2017
Posts
15
Reaction score
4
I've been sick and haven't installed mine yet, however when installing my S&B intake I broke one of those orange clips. I ordered a similar hose off ebay and removed the orange clips out of them (K2GZ6758-HA).
Notice anything different with this intake? Intake/supercharger noise, MPG difference?
 

BadWRP

Full Access Member
Joined
Sep 23, 2017
Posts
716
Reaction score
596
Considering the UPR kit or the SPE seperator. Any thoughts UPR or SPE?
 

HAP

Full Access Member
Joined
Feb 11, 2014
Posts
808
Reaction score
436
Location
NE NC
The SPE is very nice and provides easy use of the drain back function if desired. One bolt and it’s off. However, I would recommend getting a 125mm SS bolt to replace the one supplied. It is a little too short and does not engage as deep as the OEM valve cover bolt that it replaces. I submitted photos somewhere on this forum of the install.
R,
HAP
 

WC114

Full Access Member
Joined
Jun 25, 2014
Posts
179
Reaction score
85
As far as the MPG go, it’s hard to tell I don’t drive enough. The mileage has improved some, not sure if it’s from being broken in or the catch can is helping -only 2800miles. In all city driving I’m getting. 10.6 with a fairly heavy foot on takeoff. I also run Castrol full synthetic oil.
 

Swacer_2

Full Access Member
Joined
Aug 3, 2022
Posts
245
Reaction score
173
Location
PA
J&L OSC also makes catch cans. They currently don't offer one for the Raptor R (already make one for the GT500 with the predator), but I reached out and they said they are hoping to have one in the coming months. I have been running these on various cars for probably 6-7 yrs with good results and they are easily 1/2 the price of the UPR.
 
Last edited:

ToadSmasher2K1

FRF Supporting Member
Supporting Member
Joined
Jun 27, 2015
Posts
2,572
Reaction score
6,864
Location
KC
I ordered the Ford Performance GT500 Oil Separator, has anyone installed this yet?

Usually I’m not a catch can guy, but in this case I’m going to give it a try.
 
Top