Purple cranium rock guards

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Blind1

FRF Addict
Joined
Jan 28, 2012
Posts
12,773
Reaction score
3,316
Location
Central Alabama
I wonder if you can get these to fit over an aftermarket/high capacity cover.

I believe Wiz has done that. It's has been a while since I read his build, but I do remember him installing a big aftermarket axle cover and installing a *** on it as well. (or maybe my memory is seeing things)
 

FvilleRaptor

Full Access Member
Joined
May 23, 2013
Posts
158
Reaction score
25
Location
Pungo, VA
So can a full spider be installed over the stock 2013 cover without removing the cover. I don't want my diff to open up if I install this.
 

J DAMAGE

Full Access Member
Joined
Jul 15, 2012
Posts
880
Reaction score
505
Location
NJ
How are these installed without removing the differential cover like it's advertised?




Sent from my SAMSUNG-SGH-I337 using Tapatalk

The factory cover is siliconed on real good, you remove the bolts its not going anywear, just changed my cover and it was a bitch getting the factory cover off.



So can a full spider be installed over the stock 2013 cover without removing the cover. I don't want my diff to open up if I install this.

Thats what the spider is for, placement over your cover for added protection.
 

mudblood

FRF Addict
Joined
Nov 11, 2013
Posts
1,429
Reaction score
618
Location
Atlanta
Any torque requirements for the diff bolts? This is a very inexpensive modification I am darn interested in.
 
Last edited:

Vash

FRF Addict
Joined
Mar 13, 2011
Posts
1,009
Reaction score
469
Location
OK, USA
I think the torque on both front and rear diff bolts isn't much. Like 16 or 17ft-lbs.
 
Top