Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Hopefully putting the new display in the 2010s is as easy as putting a HUD in a non-HUD vette. I plan on putting the new display in my truck I really think that we should have gotten that before the 2011 SD.I've been complaining about the display since I got my Raptor! I'm hoping the 2011's will have the new display (forget what Ford calls it) and hopefully it will (most important) do a MUCH better job of indicating what mode you're in, what's on, what's off and what time dinner is (j/k about the dinner thing)
Thats the same with the HUD on vettes. You have to add the wiring harness.I heard from a reliable source (gawd I hate saying that but it's the best I can do) that the displays are not interchangeable. Apparently the wiring harness is completely different
I hope I'm wrong.
just went out and played a bit and I can replicate Tim's results; no blink when the diff is locked.This does not work for me. It does not turn off advancetrac when:
4hi off road mode and diff lock. Press advancetrac button. I've gone so far as duct taping the ******** button for 2 hours and it won't blink or turn off advancetrac!
Again the icon blinks fine with all other combos EXCEPT for when the diff is locked the truck is in 4 wheel drive, off road mode on and advancetrac is the LAST button I
press or hold down.
4x4->ORM->Advancetrack for 10sec to get the flash->lock the rear
4x4 --> ORM --> HOLD Advancetrac for 10sec to get the flash --> Lock the rear
Write it down