What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Plan B

Full Access Member
Joined
Dec 31, 2013
Posts
104
Reaction score
25
Was very pleased to actually hear the 6.2 now. Still trips me out that the exhaust diameter for the 6.2 is so small. The car in the pic above has a full 3inch side exit exhaust on it and it's only a 2.4 liter! Although, the car has quite a bit of forced induction... hehe...
 

ZBoater

FRF Addict
Joined
Mar 9, 2014
Posts
1,980
Reaction score
865
AMP Research Bedstep. Having the Powerstep done on Tuesday. This one was easy to do myself. You will need. a 21mm socket and a lot of elbow grease to get the two big nuts off the Raptor.

ImageUploadedByTapatalk1423258236.044441.jpg

ImageUploadedByTapatalk1423258247.910179.jpg
 

The Macf

FRF Addict
Joined
Sep 17, 2012
Posts
6,844
Reaction score
3,926
Location
Vegas
Armed it.

783f6424beea36b021f9d80cec208b2d.jpg
 

justuspost

Full Access Member
Joined
Sep 8, 2014
Posts
409
Reaction score
138
Location
Portland OR
AMP Research Bedstep. Having the Powerstep done on Tuesday. This one was easy to do myself. You will need. a 21mm socket and a lot of elbow grease to get the two big nuts off the Raptor.

View attachment 60457

View attachment 60458
Let me get this strait. You have to take your two big nuts off? Do you not have a tailgate step? On the sides, I use the tire.

Put your nuts back on and become one with your truck. :-D

For sure these will get ripped off if you go off of the parking lot.
 
Top