Turbos stopped working.

[Blackestraptor]

Yesterday I cleaned my AFE intake from my last raptor run and my took a trip to dominos after it finished drying. Now my truck’s turbos don’t spool and I’m left with just a v6. All hoses seem to be connected and after I disconnect the battery everything works for 5min then the turbos cutoff again. Please help.

 

[TerribleONE]

Did you get a CEL?

I would double check all your hose clamps/couplers.

 

[Blackestraptor]

CEL?
I double checked my cables and they are all good. ‍

 

[The Car Stereo Company]

CEL?
I double checked my cables and they are all good. ‍

check engine light

 

[Blackestraptor]

Check engine light came on. I ended up disconnecting the battery again and now it is working just fine. I found another thread that was saying I might have had too much moisture in the intake.

 

[FordTechOne]

Check engine light came on. I ended up disconnecting the battery again and now it is working just fine. I found another thread that was saying I might have had too much moisture in the intake.

Moisture in the intake will cause the engine to bog down under boost and will set misfire DTCs. That doesn’t sound like your issue.

Do you have ForScan so you can pull codes?