h&m racing design ford raptor long travel kit (clean post)

[Jimbo]

That's awesome, until you're cooking, hit something, lose control into the water, @Rookie the truck, and drown.

 

[canamds450]

Got any coconut shrimp? I'm hungry

Not, but a full bucket of shrimp for peel and eat hahaha


Sent from my iPad using Tapatalk

---------- Post added at 12:37 AM ---------- Previous post was at 12:35 AM ----------

That's awesome, until you're cooking, hit something, lose control into the water, @Rookie the truck, and drown.

The passenger was holding steering wheel while i was flying the drone


Sent from my iPad using Tapatalk

 

[BearLeeAsian]

How about some pineapple shrimp


Sent from my iPhone using Tapatalk

 

[Deleted member 12951]

The passenger was holding steering wheel while i was flying the drone

Sent from my iPad using Tapatalk

Ideally hopefully the other way around. Teach your passenger how to fly the drone so you can drive and really take it for a spin.

 

[bstoner59]

At my shrimp farm, this is the best place to ise the raptor on my little desert
http://youtu.be/4DwmY06RhOU

https://vimeo.com/140733173



Sent from my iPad using Tapatalk

---------- Post added at 12:06 AM ---------- Previous post was at 12:02 AM ----------




You can see the stance at the video i upload it here.
Bypass shaft shown at the rear is around 9.5"

RPG truck with spares tires at the bed is 8"



Sent from my iPad using Tapatalk

Is that your Deaver +3 at ride height? You need to get those re-arched if so.


Sent from my iPad using Tapatalk

 

[canamds450]

h&m racing design ford raptor long travel kit (clean post)

Is that your Deaver +3 at ride height? You need to get those re-arched if so.


Sent from my iPad using Tapatalk

Those are RPG ford raptor national HD leaf springs
Mine are +3 arched

Where you see the red mark is where RPG ford raptor bypass sits, mine are 1.5" higher


Sent from my iPad using Tapatalk

 

[SDHQJASON]

Still not sure why you want your truck to sit so high. This truck has our LT kit on it, sprung under, cantilever, fiberglass and 37's. Sits nice and low.

 

[canamds450]

Still not sure why you want your truck to sit so high. This truck has our LT kit on it, sprung under, cantilever, fiberglass and 37's. Sits nice and low.

Nice truck i like the way your truck looks, but at RPG that is their set up. They send me a higher leaf springs thinking i will be using two 37's as spares tires, but i do not need spare tires on my truck beside the stock spare tire..
RPG ford raptor

My ford raptor bed




Sent from my iPad using Tapatalk

---------- Post added at 03:31 AM ---------- Previous post was at 03:27 AM ----------

Nice truck i like the way your truck looks, but at RPG that is their set up. They send me a higher leaf springs thinking i will be using two 37's as spares tires, but i do not need spare tires on my truck beside the stock spare tire..
Btw are those the same fender that i have? The +3"
My truck is 31" from front lip of the truck to ground rpg is 34" from front lip to the ground.
RPG ford raptor



My ford raptor bed




Sent from my iPad using Tapatalk

Sent from my iPad using Tapatalk

 

[canamds450]

Back in Vista, CA this week. This is my new toy i use to move around to carlsbad and vista.
Will see if i take my ford raptor to my home in vista for a check either at h&m racing design or RPG.
$5K the round trip + 1000 the ground shipping to the chop.
So i still thinking.


I will be at willow spring race track from lamborgini who invited me to use my gallardo at the track.
Hope i can do the same at the desert with a raptor


Sent from my iPad using Tapatalk

 

[canamds450]

I was expecting to use the gallardo tomorrow that i arrive to sandiego, but an idiot texting while driving hit the rear bumper of my gallardo when my mother was driving the lambo today.

Sent from my iPad using Tapatalk