GEN 2 Air bag light on after leather install

[sajprice86]

Just had a local upholstery shop install factory leather skins on my 2019 Raptor. When I picked it up there is an air bag light on. We checked the plugs under both driver and pass seat and everything is plugged in. They had a pretty old tester which wasn’t pulling any fault codes. Thoughts?

 

[CoronaRaptor]

They ****** up probably, might have to remove the upholstery an check for a pinched or broken wire.

 

[FordTechOne]

You will need an OE level scan tool such as ForScan to pull the DTCs. The passenger seat contains the Occupant Classification System Module (OCSM), OCS sensor, and bladder. If any of those components were damaged during the seat cover installation, you will need to obtain an OCS service kit, as the components are replaced as an assembly.

There are also harness connectors within the seat, including the OCSM connectors and seat position sensor. It’s possible that the shop left one unplugged or partially plugged in.