Geiser Coils & Element Hard Parts UCAs on 2019 SCAB

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

chopn8r

Member
Joined
Apr 6, 2021
Posts
15
Reaction score
30
Location
San Diego, CA
I finally threw some parts at my 2019 Raptor SCAB!!

Geiser Offroad 2.5" progressive coils
Element Hard Parts Billet upper control arms241191147_1227858501066428_6581150364878640672_n.jpg241313088_572444490614976_7779264535792534764_n.jpg241349500_686583855633486_675560651732255222_n.jpg
SDi Eclik active suspension on OEM Live valve shocks
BFGoodrich 37x12.50R17 KO2 tires
Raceline Ryno 17x8.5 wheels in +18 offset

Loving the ride so far and can't wait to get off pavement to see what these coils are going to do. I may need to have SDi revalve my shocks again. TBD.


241224244_1187388045102967_7934195461695807598_n.jpg241344513_596911361666718_4131207695871344684_n.jpg
 
OP
OP
chopn8r

chopn8r

Member
Joined
Apr 6, 2021
Posts
15
Reaction score
30
Location
San Diego, CA
Truck looks great. How much did it raise the front of the truck?
Man, I was so stocked to get everything installed that I never actually measured before & after for an accurate lift amount. :confused: They are the smaller Geiser coils, though...the 2.5".

I just measured it now & from center of the hub to the fender is 26" & it's been almost 2 months since the install so they should be settled in by now.

Hope that helps.
 
OP
OP
chopn8r

chopn8r

Member
Joined
Apr 6, 2021
Posts
15
Reaction score
30
Location
San Diego, CA
Hi, everyone! I bought another Raptor and have been busy working to keep up with 2 truck payments :shakehead: so I haven't done much with the truck until yesterday!

I've had my SPD Turbo Adapters for a while but was waiting until I received the resonator delete kit to install. The factory studs for the turbos are a bitch & my truck only has 26k miles on it. Do yourself a favor and get the extractor the SPD recommends! Once those were on it was trombone time!

The SPD resonator delete was developed & built for the 145" Super Crew wheelbase as a direct fit. But if you're like me and have a SCAB, they will still work with a slight modification. You can see the difference in length from the stock resonator to the new SPD equal length kit. Super Cabs are 133" wheelbase and as you probably guessed by the pics, we had to cut off exactly 12" off the front of each of the muffler tubes. Once we did that, the new exhaust slipped right on with no problems.

It's only been 1 day but I'm very pleased so far with the sound and performance of the combo. I've seen some reviews where people are saying it's too loud, but I can only assume that they are running aftermarket mufflers. I'm running stock muffler/tail pipes & don't think it's bad at all. There is minimal drone from the exhaust in the midrange RPMs but it falls completely away at highway cruising speeds in 9th & 10th gear. But when you get on it and open it up....WOAH!! It sounds like a beast!!
 

Attachments

  • 302412235_3327434910870948_2666364330243742154_n.jpg
    302412235_3327434910870948_2666364330243742154_n.jpg
    276.8 KB · Views: 17
  • 302057354_478100874173712_8764130596397001830_n.jpg
    302057354_478100874173712_8764130596397001830_n.jpg
    274.6 KB · Views: 15
  • 305537733_492807229334736_4285012649946548755_n.jpg
    305537733_492807229334736_4285012649946548755_n.jpg
    350.6 KB · Views: 15
  • 305659603_1021249188535916_4655204727853355486_n.jpg
    305659603_1021249188535916_4655204727853355486_n.jpg
    166.1 KB · Views: 15
  • INSTALLED.jpg
    INSTALLED.jpg
    209 KB · Views: 16
Top