sdi

I had some time to go out by myself for a few hours and do some testing of the E-Clik PRO system and I wanted to share some information and my experience so far. Install: The install wasn't very difficult, the most difficult part was running the connectors through the firewall grommet. The IMU...

Disappointed in SDI's gen 3 shock tuning service for my gen 2 with E-Clik. My TSW Hutto oem gen 2 shocks performed better than this with OEM leafs and coils. Who have you used with success? Current setup is Icon rear leafa option 2 with drop shackles, OEM gen 3 front coils with sdi top hats...

Looking to finally bite the bullet on my poor people Gen2. My understanding is that a Gen2 or Gen3 Live Valve setup will work on the truck. Located in Metro Detroit, MI but willing to travel for a good deal (especially if you live near an airport haha).

2020 e-cliks, SDi top hat, icon level 1 leafs, new KO2 C-Rate 34 psi, 59k miles. I installed e-cliks first, and the tuck drove so nice. Then installed the top hat and leafs, and the truck was a slightly stiffer, but not too bad. But lately, the ride has become terrible. Like the tires are at 80...

Just installed Icon leaf springs, but kept it at level 1. Raised the rear almost 4 inches (40 1/2 to 44 1/8). Definitely stiffer, but I am sure it will settle. I have an issue though….I know am getting a clunking sound over aggressive speed bumps. Everything torqued to spec (189/81/145 ft-lbs)...

Hey everyone! So finally I got around to doing the SDI top hat and deaver +4 HD’s on the truck, and I must say, Very impressed with this set up! Previously I had some trouble finding pictures of Gen 2’s with the Buckets on, so hopefully this helps other out that are curious. The buckets got...

Has anyone had any issues running SDI e-Clik on their Gen 3 Raptor? Off-road Warehouse in Corona installed the e-Clik system in early November. Flash forward to 12/26 and my truck bricked when attempting the 6.5.0 OTA update. I brought the car to the dealer and after two weeks, the truck was...

I have swapped out my 2017 Gen 2 Raptors suspension for the SDI eclick system and want to sell my old parts. 1- A pair of the Front Factory Race Series Coilovers (Fox FRS 3.0 coilover Internal Bypass Recirculating Finned Remote DSC, part #883-06-140 listing at $3,399 new) for sale with approx...

I finally threw some parts at my 2019 Raptor SCAB!! Geiser Offroad 2.5" progressive coils Element Hard Parts Billet upper control arms SDi Eclik active suspension on OEM Live valve shocks BFGoodrich 37x12.50R17 KO2 tires Raceline Ryno 17x8.5 wheels in +18 offset Loving the ride so far and...