Official R Delivered Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BabaMike

Full Access Member
Joined
Dec 29, 2019
Posts
324
Reaction score
342
Location
Vancouver
For those of us with new June build dates, will we get the heated steering wheel?
I have seen only 2-3 stickers in Canada that have heated steering wheels not deleted
Not sure when Ford is officially planning to start adding heat to all their models, it’s all hit n miss
 

IDASEV

Member
Joined
Apr 19, 2023
Posts
9
Reaction score
7
Location
UT
For what it's worth, here is what my experience has been with the oil leak.

Received vehicle March 27th
-April 8 discovered a serious oil leak (~1000 miles)
-Dealer orders Crank seal and cover April 8
-All parts received except for the crank cover as of April 18
-No ETA or any update so I emailed the Ford CEO and called the customer service areas.
-Heard back in 1 day. Basically said that my part is on the emergency escalation list but they have no ETA because it is backordered.
-Dealer told me that the part (Crank Cover)is shipping directly from the manufacturer and they are producing 10 per week but they have no idea where I am on the list. "It could be tomorrow or it could be six months"
Sharing an update on this post. The part is in! The truck goes to the dealer in the morning and should be done by end of day (we will see). This is basically a six week turnaround for those that may have to replace their seal and cover.

I did get a call from the office of the CEO last week and the individual gave me their contact info and asked me to call them after its completed and they will "see what they can do for me". Expectations are low haha..

Will let y'all know if it actually gets fixed.
 

1966 F100 Raptor

Full Access Member
Joined
Sep 25, 2019
Posts
451
Reaction score
1,024
Location
Phoenix AZ
Sharing an update on this post. The part is in! The truck goes to the dealer in the morning and should be done by end of day (we will see). This is basically a six week turnaround for those that may have to replace their seal and cover.

I did get a call from the office of the CEO last week and the individual gave me their contact info and asked me to call them after its completed and they will "see what they can do for me". Expectations are low haha..

Will let y'all know if it actually gets fixed.
And then if it's the crankshaft machining error and not the seal and cover. Then what?
 
Top