What did u do to your raptor today?

[Jakenbake]

Pics? Interested to see what reinforcements are needed.

https://krazyhousecustoms.com/gen-1-raptor-gen-12-f150-slot-delete-kit/

Previous owner of my ‘13 damn near tore the right rear LCA mount off, straightened it but eventually will reinforce it with this. Interested in pics also @IDI-Charlie !

If I recall he is talking about slot deletes/reinforcements, but I could be wrong. Pretty interested as I am a big “DIY” fan.

Also if you want to look into reinforcing the rear LCA’s look at what KHC does with their kits or what HM does for their long travel set ups.

 

[prjeschk]

Swapped to Eibach lift springs in the front and added the emblem decals.

 

[CoronaRaptor]

If I recall he is talking about slot deletes/reinforcements, but I could be wrong. Pretty interested as I am a big “DIY” fan.

Also if you want to look into reinforcing the rear LCA’s look at what KHC does with their kits or what HM does for their long travel set ups.

https://krazyhousecustoms.com/gen-1-raptor-gen-12-f150-slot-delete-kit/

Previous owner of my ‘13 damn near tore the right rear LCA mount off, straightened it but eventually will reinforce it with this. Interested in pics also @IDI-Charlie !

Oh I see, yeah I know about these, thought he was talking something new and exciting, still interested to see the pics though, since they are custom made.

 

[Gmen]

Refinished front and back bumper

 

[prjeschk]

Refinished front and back bumper

Looks really good! I need to refinish my bumpers as well. I was thinking about doing black line-x on the bumpers, flares, and running boards.

 

[laselvasurf]

Refinished front and back bumper

View attachment 161771

View attachment 161772

Looks really good! What did you use to refinish it?

 

[Gmen]

My body shop guy did. He grinded all the rust down first. Got with his paint rep from Sherman Williams and was able to get match. Super happy with the look both bumpers were in bad shape

 

[Cowpoke]

New black lug nuts.

 

[mprice1234]

Added a couple of BuiltRight Industries Panels to the drivers side bed. Just a few items for now for good measure when up in the mountains.
View media item 15619
A little better shot with flash on.
View media item 15620

 

[laselvasurf]

Replaced the keypad on the drivers door. Found the part for $50 on ebay and it took about 30 minutes to swap it out. The old part worked perfectly, it was just well used.

Before:


During:


After: