Trailering With Gen 3

[HAP]

So, thought I could simply hook my boat up to my R and take it for a test run after replacing the valve springs on my 466. Well, not so fast; the relocation of the trailer plug receptacle from below the bumper on the Gen 1 to in the bumper on all other Gen's left me about 10" too short on the harness plug. So today I replaced the 5-pin harness with the appropriate length to accommodate the new set up. Also, with the 37's I had to get a 6" drop vs the 4" drop for my Anderson Rapid Hitch (that I planned ahead for).
All good now for the next time.
Just little things...
R,
HAP

 

[GCATX]

Man, I need problems like that. Crisis averted!

 

[forbin42]

I only have a simple smaller pop-up camper, and for me only needed a 3" drop with the 37" tires.