Ruger
FRF Addict
Evidently an alignment is needed after installation?
Sway Bar for the stock LCA: More responsive in corning, better side load control & balance
- Thread starter NatG
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
GregFoutz
Member
- Joined
- Apr 13, 2013
- Posts
- 36
- Reaction score
- 58
maybe. you do have to take the nut off the back side of the rear lower arm mount to put the support brace in there, but if you are careful and mark the bolt location so you can make sure it doesnt move you wouldnt need to re-align it after.
