Halo Raptor
Full Access Member
I purchased the Pro Eagle Standard 2 ton and cradle. I also got the JDS Customs mounting plate. The JDS Customs plate has remained the same and has 4 weld bolts on the plate to mount the Pro Eagle cradle to. I found out the hard way that Pro Eagle has changed the 4 bolt holes and they no longer match up to the mount plate. I kept 2 of the holes in the cradle and drilled two new ones to match. The problem is the holes are very close to the edge because you cant move the cradle any further back or the jack will hit the tailgate. Glad I checked it mocked up first before I started drilling. I dont know what Pro Eagle makes that cradle out of, but its strong/hard AF. Bring your A game drill bits. I have no doubt that thing will last until the end of time. Also found the mount bolts that connect the JDS and the cradle are too long. After connecting them, I had to cut the bolts off. Im glad I got the JDS spacers because the bed mat was thicker than I thought. I alsot got the low pro hinge mounts for a future tire mount. Mounted them at a 45 degree angle. After all the min fab work, it came out amazing. Fits perfect.