Hoses coming out to cargo bed

[rookierap]

Hello, I purchased a 2019 model and later noticed two hoses with some kind of connector at the tip coming out to the cargo bed. I’ve attached some pics to see if anyone can help me out and tell me what these hoses are for?
Thank you!

 

[TwizzleStix]

Those are drains for whatever the previous owner had mounted on the bed rails. Likely a full bed cover. My Tri-fold cover came with the hoses as well.

 

[CoronaRaptor]

They are probably the drains for the current roll cover you have. I never even hooked mine up, have never had water even drain into my box from my Bak-flip cover. Leave em off or hook them back up, up to you.

 

[RaptorFun]

@CoronaRaptor is correct. Those are the drain tubes for the bed cover. Simply reach underneath the bed cover canister and feel around for a hole and reattach.

 

[04Ram2500Hemi]

@CoronaRaptor is correct. Those are the drain tubes for the bed cover. Simply reach underneath the bed cover canister and feel around for a hole and reattach.

Both are correct. My wife has a Retrax bedcover with the drain tube thingys.

 

[rookierap]

Thank you all for your comments. That makes sense since mine already came with a retractable cover installed.

 

[chrisuhl797]

They are probably the drains for the current roll cover you have. I never even hooked mine up, have never had water even drain into my box from my Bak-flip cover. Leave em off or hook them back up, up to you.

They go to your rollup cover and fit up underneath sometimes they fall off

 

[Doctor Mike]

Those are definitely drainage hoses from your “ReTrax”retractable bed cover, however yours appear unattached. They should run from the box down and insert in the openings on the lower back wall of the bed. You are best advised to reinsert them so any excess condensation does not spill into bed itself

 

[Doctor Mike]

Hold on, on second closer view, they are properly inserted on back wall of bed however have become detached from ReTrax box! Reach up under box with them and reinsert

 

[Reaper308]

I have the Retrax on mine I also used sealant around the plastic that is attached to your clear rubber hoses those plastic pieces push up and twist to lock in place to the bottom of the box that your cover rolls up in but they are just plastic and one of mine broke when I slid something under the box so that’s why I reattached mine and added to the other drain tube from the side of the box. Pretty easy fix.