GEN 2 CEL after shutter removal

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

peavey02

Active Member
Joined
Mar 13, 2019
Posts
74
Reaction score
36
Location
Fort Bragg, NC.
I have a 2019. I removed all of the shutters but left the motors plugged in. Ever couple of days my truck would throw a CEL. I unplugged both shutter motors and the light went off.

I will log into FORSCAN when I get home and make sure everything is clear. (clear everything then see if it comes back.)
 

Dustan

FRF Supporting Member
Supporting Member
Joined
Dec 10, 2018
Posts
486
Reaction score
640
Location
Boulder Colorado
I’ve ran with the motors plugged in and without. No dash CEL but it will show a code on forscan. I figured why have them running constantly for no reason. I taped up the connectors to keep the water and dirt out.
 
Top