GEN 2 2018 transmission dipstick level

[loupuleff]

I checked my tranny level yesterday I'll be darned the manual don't show what level a or b on the stick so I looked on every forum I couldn't find it and there seems to be a lot of confusion on this forum as well so I called my buddy(mechanic) at ford he said for the 2018/10 speed you want to be in the (b) hash mark area NOT the (a) so thought I'd share that for people like me that like to do their own maintenance.

Sent from my SM-T813 using Tapatalk

 

[pastorwug]

Don't happen to have a picture do ya?

 

[Stroked out]

B hash mark at cold or at running temperature?

 

[loupuleff]

At temperature I think he said 210 degrees but I'll verify that

Sent from my SM-G950U using Tapatalk

 

[loupuleff]

Actually it gives the temp on there

Sent from my SM-G950U using Tapatalk

 

[loupuleff]

So getting fluid in is a real pain especially since it's right next to the exhaust and it's hot as heck so I had this pump I bought years back for getting oil out of a transfer case I think it was but anyway it actually fits right on the ford transmission bottle but the tube touches the hot exhaust so you need to keep it off there so I'm going to sleeve it or get a piece of high temp wire cover to protect it from melting if it touches.

Sent from my SM-G950U using Tapatalk

 

[loupuleff]

B hash mark at cold or at running temperature?

210 degrees and running

Sent from my SM-G950U using Tapatalk

 

[loupuleff]

Don't happen to have a picture do ya?

Yep

Sent from my SM-G950U using Tapatalk