RaptorNewbie2018
Member
Need a little help here.. 2018 Raptor, 802A, made a few FORscan mods and each seem to be functioning as it should. I made sure to document the original value for each Address line I modified. A day or 2 later, I decided to go back in & create a backup of each modded module. Before doing so, I went back & checked each module/address modded line, to be sure my value entries were accurate. I noticed that several values were different than what I had entered. I'm a bit freaked out now & know that I did not make an entry error. I re-checked 10x before hitting the "Write All" button. IS this normal??? If not, can anyone share advice? Thank you...
Here's a look of the modules/values:
By the way.. I'm using the this OBDlink:
https://www.amazon.com/gp/product/B006NZTZLQ/?tag=fordraptorforum-20
Here's a look of the modules/values:
By the way.. I'm using the this OBDlink:
https://www.amazon.com/gp/product/B006NZTZLQ/?tag=fordraptorforum-20