Rigid Dually back up lights installed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BigMikeVP

Member
Joined
Jan 25, 2016
Posts
15
Reaction score
2
hopefully not a stupid question, but is there a way to tap reverse lights to make these operate as well as a upfitter? kinda sucks to have to hit a upfitter to go in reverse all the time?
 

Lucky14

Full Access Member
Joined
Oct 3, 2010
Posts
199
Reaction score
4
Location
Poway, CA
Yup. What I did was tap into the wire coming out of the trailer plug for the reverse lights. Then run a wire from the uplifted back to those lights. Note that if you don't want the existing reverse light to come on when you use the uplifter, you need to put a diode on the line so that power wont flow back to that light when you hit the uplifter. FYI - My son-in-law has my Raptor these days so I'm just working from memory… :)
 
Top