Fog light thought

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,415
Reaction score
3,074
Location
Houston, TX
got mine installed,

Back of bumper showing what needs to be trimmed
414650673_photobucket_37962_.jpg

Trimmed
414650673_photobucket_37961_.jpg

Installed
414650673_photobucket_37960_.jpg

Fogs from back, one bolt in bottom and one bolt in the top, top bolt has a 3/4 spacer between the bumper and fog.
414650673_photobucket_37959_.jpg

grill trimmed
414650673_photobucket_37958_.jpg

Final product.
414650673_photobucket_37957_.jpg

414650673_photobucket_37956_.jpg

Lights on, waiting on the HID's, didnt want to go ahead and buy them if the fogs werent gonna fit.
414650673_photobucket_37955_.jpg

414650673_photobucket_37954_.jpg

414650673_photobucket_37953_.jpg

Looks killer and will look even better with HIDs. This is also a great solution for the guys who are worried about legality of driving/fog lights.
 

verytalonted

Full Access Member
Joined
Dec 8, 2010
Posts
460
Reaction score
297
Location
San Angelo, TX
i dont have my truck yet but i am thing about doing this. how hard was it to pull the bumper off? how long of a project would u say this is?

It takes like 5 minutes to pull the front bumper (4 main bolts and 3 little misc bolts)

The hardest part about this was the whole coming up with how to make it work.

Quick list of sections to do this:
1) cutting the F250's original mounting bracket to fit behind bumper.
2) cutting the Raptor's backside of bumper to have room for the fog lights
3) deciding where to drill for the F250's fogs to now bolts down (will need to make a spacer for the top bolt, I used some pressure treated wood)
4) cutting and trimming the Raptor's lower grill to fit the fog lights sticking through (took most time)
5) install everything, then make adjustments as needed.
6) wire everything up.
 

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,415
Reaction score
3,074
Location
Houston, TX
My truck has halo projectors on it and would like to use similar fog lights if possible. Does anyone know if the earlier version (99-04) F250 fog lights will fit in the space? I've only been able to find the halos for the earlier F250.

1999-2004 F-250 F-350/2000-2005 EXCURSION HALO PROJECTOR BUMPER SMOKE FOG LIGHTS | eBay

I'm not sure. But I can tell you that 2005 Excursions had the same front end as the 2005-2007 Super Duties...so I could see it being the same kind.
 
Top