2013 SC Raptor - dyno'ed 520 rwhp

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Shad0w

Full Access Member
Joined
Dec 20, 2012
Posts
63
Reaction score
8
Location
Mississauga, Ontario
Hey Guys,

Here's a vid of my 2013 Raptor up on the dyno @ Steeda.ca
Apologies, the guys put the wrong year on the video... its not a 2012, its a 2013.

Bob's 2012 Roush-Charged Raptor on the Dyno - Steeda.ca - YouTube

She Dyno'ed @ 520 rwhp.

This is what she's had done so far:

ROUSH R2300 Phase 2 Kit
Kooks 1-3/4 headers - ceramic coated (black)
Kooks true dual catback Exaust - also ceramic coated (black)
Steeda Custom tune

Still not done with her, next week she goes back in for more work :)

Enjoy!
 
Last edited:

Rookie

Supporting Vendor
Supporting Vendor
Joined
Dec 16, 2012
Posts
9,760
Reaction score
3,594
Location
Fort Wayne, IN
This is my lack of knowledge on the dyno world but is your rwhp higher than most of the others because of the type of dyno or because you have different mods?
 

MTF

FRF Addict
Joined
Nov 27, 2010
Posts
5,358
Reaction score
2,285
Location
Celebration, Florida
Uummmm,

Again, I don't want to trash Roush!!!

But that's not a full pull in 4th gear or third. Like the Whippled guys are putting up.

Looked to me like top of first then second and quick shut down at the beginning third.

Or am I missing something?

Theoretically:
Roush's Stage 2 Tune is 590 fwhp = 472 rwhp
give or take a few HP with what a third party Tuner can do.
 
Last edited:
OP
OP
S

Shad0w

Full Access Member
Joined
Dec 20, 2012
Posts
63
Reaction score
8
Location
Mississauga, Ontario
Uummmm,

Again, I don't want to trash Roush!!!

But that's not a full pull in 4th gear or third. Like the Whippled guys are putting up.

Looked to me like top of first then second and quick shut down at the beginning third.

Or am I missing something?

Theoretically:
Roush's Stage 2 Tune is 590 fwhp = 472 rwhp
give or take a few HP with what a third party Tuner can do.



Incorrect, the truck was in 2nd when they began the pull in the video, count the shifts in the vid... ran right up into 4th.

That was one of a couple of pulls :)

You're also forgetting the Kooks headers etc :)
 
Last edited:
Top