2017 Raptor Geiser Progressive Springs

kromealt said:

Been pounding on mine and like gen1s, think these are exorbitantly better than stock, especially level kits. Rides so nice.

I was hoping they would be taller than the advertised 2" and they are. I'm currently taller than I was on 5th ring of rpg collars (rpg claims 3.5 but I don't think so), I do expect them to settle a smidge.

37" Toyo MT
43.8" front
43.5" rear loaded on +3

Click to expand...

0-60 freak said:

Also how did u achieve 43.8 front...is that with the 37's?

Sent from my SM-N950U using Tapatalk

Click to expand...

kromealt said:

43.8 front was the 37 toyo mt and pre-settle, this setup ended up at 43.5 both front/back on my 18 and 19. Another tire will have different measurements

Click to expand...

MOT26 said:

My 2018 Raptor:

Front - mid fender stock =39.5
Front - Geiser springs =42.5
Front - add 37's =43.5

Rear - mid finder stock =41.5
Rear - Deaver +3 =43
Rear - add 37's = 44.5


2 months after install:

Front - Just over 43
Rear - Just over 43

Click to expand...

MOT26 said:

The zero offset gives the truck a better looking stance but it Will require a little work to avoid rubbing in full lock.

If you can do without the zero offset and stick with the factory offset you should have no problem with the Geiser springs.

Click to expand...

0-60 freak said:

Makes sense now, finished mine last night fresh measurements were 44.25 ft and 44.75 rear, geisers/icon opt1

Sent from my SM-N950U using Tapatalk

Click to expand...

MOT26 said:

rkwjunior

Look at post #139, I explained it there, I even posted a picture.

If you still have questions I could explain it further.

Click to expand...