New baja design pods intalled

[Mj1anderson]

Gang, finally wired up and installed my Baja Design light pods last weekend.
I went with the following Squadron pairs:
SAE in amber (gota have one street legal pair, plus fog and snow in black hills can be a ****** so hoping these help)
Racer Editon Spot
Pro Driving Combo
I purchased via SPV who was awesome to work with.
Also purchased their fantastic wiring harness system and brackets.
I also put covers on but jury is out how well they will hold up.
The bracket spacing is driving me a little nuts and when time allows I need to further dial that in, hopefully this coming weekend.
In any event awesome lights and awesome service via SPV!

 

[Morgan]

Looks great! I have this kit from SPV, too; except Pro Spots, and need to install it. Any lessons learned that you could share?

It looks like you rotated the lens bezel to be oriented correctly, but I think the combo driving lens typically has the clear(spot) portion of the lens in the top position. May not make a difference, but something I noticed when rotating the bezels for my kit.

 

[thatJeepguy]

How you like those goodyear wranglers?

 

[Mj1anderson]

How you like those goodyear wranglers?

They are actually the goodyear Territory MT
Haven't gone thru a winter yet but so far so good
Jury is still out but they are aggressive yet quiet so far
They sling rocks everywhere tho so had to install RokBlokz XL to combat that
And line-x the rear wheel wells...

 

[Mj1anderson]

Looks great! I have this kit from SPV, too; except Pro Spots, and need to install it. Any lessons learned that you could share?

It looks like you rotated the lens bezel to be oriented correctly, but I think the combo driving lens typically has the clear(spot) portion of the lens in the top position. May not make a difference, but something I noticed when rotating the bezels for my kit.

Yes you are correct
Hung lights upside down but flipped the lens around to properly orientate the BD logo
I will say so far the driving combos are my favorite of the three
The wide cornering aspect gets out to the shoulders nice!
I'm no expert and this ordeal took me like 5 hours
Bracket and lite placement *** a bitch for me
Wiring was easy due to SPV kits
I fished lights thru a gap.above skidplate and up and around the battery to the firewall
But like I said alignment is still kicking my ass...
The Racer Pros (which are alleged to be 40% brighter than the Pro Spots are f'd up and are being impeded by corner of bumper
Hopefully I can correct this weekend
SPV is awesome!

 

[Morgan]

Yes you are correct
Hung lights upside down but flipped the lens around to properly orientate the BD logo
I will say so far the driving combos are my favorite of the three
The wide cornering aspect gets out to the shoulders nice!
I'm no expert and this ordeal took me like 5 hours
Bracket and lite placement *** a bitch for me
Wiring was easy due to SPV kits
I fished lights thru a gap.above skidplate and up and around the battery to the firewall
But like I said alignment is still kicking my ass...
The Racer Pros (which are alleged to be 40% brighter than the Pro Spots are f'd up and are being impeded by corner of bumper
Hopefully I can correct this weekend
SPV is awesome!

This is helpful, thanks- I think I will try to push the brackets as far outboard as possible to limit interference from the bumper with the inner most light.

 

[Froadin]

Nice looking performance blue! Have you used the lights much? I debated those but went with BD LP4 ditch lights and LP6’s on the front of the bumper.

 

[Froadin]