Foam cannon recommendations

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

phydough

FRF Addict
Joined
Aug 4, 2010
Posts
1,071
Reaction score
661
Foam cannon=
F-1Ferrara.jpg
 

blockdoc

FRF Addict
Joined
Feb 19, 2012
Posts
2,576
Reaction score
1,175
Location
Lexington, KY
I'm happy with everything I've gotten from Autogeek, including my foam cannon. You just order whatever fitting you need for your pressure washer with the foam cannon (might have to take a look at the wand on your washer). Basically it'll just replace the metal tube that goes into the wand.

The advantage to a foam cannon is that you let the foam start to lift and lubricate grime. Then you wipe it down with a wash mitt and avoid scratches and swirl marks. A good wash mitt, in a bucket with a grit guard, is a must have.

I rinse with the pressure washer, then foam cannon, wash with mitt and shampoo, rinse with pressure washer again, dry with air dryer and drying towels & detail spray/wax as you dry. Takes me 45 minutes (but the Opticoat makes the process easier and faster).
 
Top