Awesome idea!
Expedition Bed Cage - Tent, Awnings and Lights
- Thread starter Laurie
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OOOOO
Member
- Joined
- Jul 5, 2011
- Posts
- 19
- Reaction score
- 2
I saw this on expedition portal site. Very nice design.
goathearder
Full Access Member
Thats awesome! Hows it mounted?
OP
OP
Laurie
Full Access Member
- Joined
- Dec 4, 2011
- Posts
- 92
- Reaction score
- 86
The main rack mounts to the bed sides with 22 bolts per side. Perhaps a bit overkill but I wanted to spread the load out.
The upper part of the rack which has the lightbars, tent and awnings is removable so that the setup can be flush with the cabin height and that mounts to the lower part with 6 big bolts, with the plates bent in such a way that they self center somewhat when you lower the thing down on the hoist.
The tent has 2 channels on the bottom side and mounts to the upper part cross-bars with a U-bolt system.
Similar threads
