Deaver rear leaf springs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

hackleman

Full Access Member
Joined
Mar 21, 2013
Posts
107
Reaction score
27
Location
Odessa, TX
Thread revival. Getting Deaver leafs soon. I'm on mid-perch with stock suspension and icon bumpstops. I want to delete the rear spacer block. Which Deaver configuration would be best to keep the truck fairly level, stock height, +1 or +2?.
I searched the forum but came to no conclusion
Thanks
Bruce

Heads up on Deavers with bump stops.
The leaf pack bolt in the rear will rub on the RPG bump stop mount. you have to remove the bolt. A representative at deaver told me it is fine with out the bolt


http://www.fordraptorforum.com/f9/deavers-rpg-stage-2-a-31474/
 

svc

Supporting Vendor
Supporting Vendor
Joined
Nov 8, 2011
Posts
1,636
Reaction score
3,407
Location
Worldwide
Deaver has removed this shackle so it is no longer an issue

-Jeff
 

Jay54583

Member
Joined
Mar 21, 2014
Posts
2
Reaction score
0
Factory blocks

Hey guys new to site, anyone have any of the factory blocks and u-bolts to sell after conversion?
 

vanilla_gorilla

FRF Addict
Joined
May 25, 2011
Posts
2,513
Reaction score
1,003
Location
NorCal (Sacramento)
I have the blocks, U bolts and leafs...where you you located?

---------- Post added at 02:18 PM ---------- Previous post was at 02:18 PM ----------

I am just going to scrap them...
 

Jay54583

Member
Joined
Mar 21, 2014
Posts
2
Reaction score
0
Factory blocks

live close to chicago, dont need the leafs though just blocks and ubolts..
 

BRAPPPP

FRF Addict
Joined
Apr 16, 2012
Posts
1,000
Reaction score
155
Location
San Luis Obispo, Ca
I got em too Jay. In California

---------- Post added at 09:33 PM ---------- Previous post was at 09:31 PM ----------

Bruce,

The Deaver +2 removes the stock block and keeps the stock ride height.

-Jeff

If looking to lower the rear is the +1 a good option?
 
Top