What did you do to your Raptor today? (Gen2)

Installed ronin tailgate assist - nice addition, wish I had the tailgate step though!!!

had it ok ‘18 miss it on the ‘20

Badgertits said:

Installed ronin tailgate assist - nice addition, wish I had the tailgate step though!!!

had it ok ‘18 miss it on the ‘20

View attachment 159495

Click to expand...

Non step equipped tailgates do not include any dampening? Or lift assist? They will just freely drop?

Installed CVF Titan IC, Boomba adapter, and ADD Pro Bolt On v2.

Need to talk to ADD on Monday about the 2 bolts they include to replace in the IC mounting bracket. The instructions conveniently leave out the steps for holding up the IC while running the new bolts through the skid plate and mounting bracket.

K223 said:

Non step equipped tailgates do not include any damping? They will just freely drop?

Click to expand...

My '19 non-equipped tailgate step has damping. I'd give up the damping for a tailgate step. lol.

K223 said:

Non step equipped tailgates do not include any damping? They will just freely drop?

Click to expand...

I wondered about that too.

Hello all,
I recently found this forum and was hoping someone could help me out. I'm installing baja designs light pocket kit and can't find the amp requirements to figure out if I have to use both 15 amp wires to run the 6 lights. If I run 4 lights on 15 amp, then I should be able to run the other 2 on a ten? Also has anyone played with which lights to group and which to put on second switch for the best results.

My rig 2019 Screw magnetic 802A carbon fiber and technology package. Eibach springs in front and whipple stage 1.

Thanks for the help

PCDESERTstyle said:

Hello all,
I recently found this forum and was hoping someone could help me out. I'm installing baja designs light pocket kit and can't find the amp requirements to figure out if I have to use both 15 amp wires to run the 6 lights. If I run 4 lights on 15 amp, then I should be able to run the other 2 on a ten? Also has anyone played with which lights to group and which to put on second switch for the best results.

My rig 2019 Screw magnetic 802A carbon fiber and technology package. Eibach springs in front and whipple stage 1.

Thanks for the help

Click to expand...

did you get pro lights or sport lights? The amp draw is different between the two and may impact any guidance.

the unlimted kit

squadron pro and race

PCDESERTstyle said:

the unlimted kit

Click to expand...

each squadron pro will draw 3.33 Amps.

Depending on which upfitter you use, they can take 15A, 10A or 5A.

I like to plan for 30% buffer.

So for my porpoises, I'd say a pair of lights on 3 separate upfitters is the way to go.

I didn't see a spec sheet on the race versions of the lights, so I'd assume they draw 3.5 A or something close.