I have been reading as much as I could on the forums to figure this out but cant find an exact answer. I have a Gen 2 and want to run 37's. I have Geiser springs on order and deaver +3 in rear. I dont want to cut the fenders so I just ordered the advanced fiberglass concepts 2" to replace them. Im set on Fuel Zephyr D633 wheels with Nitto Ridge Grapplers and want the wheel to be as flush as possible but also have the possibility to suspension upgrade with either RPG Bolt or Rouge racing mid/long travel. The two offsets the D633 come in are 1mm and -12mm and are 17x9's. Which would be the better of the two for what im looking for?
Which set up gives me the flush look
- Thread starter royCfus
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Lukasz Nowacki
Full Access Member
your need a set of +1mm for the rear and -12mm for the front
Presumably if I got matching bedsides I would get -12 all around?
Yeah then -12 all around. However if you do go mid/long travel the front wheels will be past the fender after you widen the front end with the new suspension components.
Similar threads
