What did you do to your Raptor today? (Gen2)
- Thread starter Jepper
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
waveslayer
Full Access Member
Back to this thread, I installed my bakbox yesterday that I got from the rebate in June and some tailgate seals to hopefully keep the dust out next summer. Also last weekend I finally got to test mine out at the dunes. I have to say I really love the power and ride.
Could you post some pics of the extra seals you did around the tailgate? I get so much dust in it, drives me nuts. Especially when I head to the range, all my stuff is covered!
BigCSS78
Full Access Member
https://www.amazon.com/dp/B00IPQWXZQ/?tag=fordraptorforum-20
You just cut to size and stick it around the edges of wear the tailgate meets the body.
You just cut to size and stick it around the edges of wear the tailgate meets the body.
91Eunos
Full Access Member
New activated charcoal cabin air filter; wash and wax mañana.
91Eunos
Full Access Member
Installed gorilla brand black lug nuts on my stock wheels...
And realized that the factory did a crappy job mounting the tires. Need to align the barely visible red dot with the valve stem. Will greatly reduce the balance weight requirement.
May wait until I take these off for the VenomRex 601s that are inbound, but I actually like the look of the stock wheel/tire combo so not in a rush. My OCD won’t allow for that crap mount job to stand for long though...
And realized that the factory did a crappy job mounting the tires. Need to align the barely visible red dot with the valve stem. Will greatly reduce the balance weight requirement.
May wait until I take these off for the VenomRex 601s that are inbound, but I actually like the look of the stock wheel/tire combo so not in a rush. My OCD won’t allow for that crap mount job to stand for long though...
Are these black or black chrome? I can only find them in the black chrome for the raptor. ThanksInstalled gorilla brand black lug nuts on my stock wheels...
And realized that the factory did a crappy job mounting the tires. Need to align the barely visible red dot with the valve stem. Will greatly reduce the balance weight requirement.
May wait until I take these off for the VenomRex 601s that are inbound, but I actually like the look of the stock wheel/tire combo so not in a rush. My OCD won’t allow for that crap mount job to stand for long though...
91Eunos
Full Access Member
Black chrome...but they still have some kind of gel/film on them; I assume to protect the finish during shipping. They’re wiped down, but not washed yet, so they may wind up a bit shinier.
Got them from CJPonyparts. Cheaper than Amazon, and fantastic customer service.
They were free with my new wheels so I'm not really surprised.Similar threads
Members online
- elpechedepeche
- Keith88
- toxwaste
- Speedhunter
- stevenstommyboy1
- 19perf-blue
- kylesatx
- raptordawg1
- Frogger22
- JBTAC
- petrolhead
- Jay_P
- Raptorbert
- shigman
- Irregular F150
- sixshooter_45
- harvell326
- RiskTkr
- SeasickLI
- Skai
- AfterMidnightRambler
- lgotye
- ToadSmasher2K1
- BadWRP
- kevo_lo
- kpecks
- Bozz
- Wichadicha
- tjs_22807
- bajastx
- furioussphinx
- jshicks
- DRC3
- mprice1234
- cptguiness
- WNCHSTR96
- pat247
- grleon65
- tm965
- kknyrass
- CleverGirl_
- Powerlies
- hapsta
- wweaver
- 14gen1
- WA2012
- TwizzleStix
- Arctic
- DethProof
- awd5906
Forum statistics
Latest posts
-
-
-
-
-
What did you do to your Raptor today? (Gen2)- Latest: Thatblackraptor