Raceline Assault

[ittybittyfds]

Does anybody have any advise or opinions on the Raceline 991B Assault wheels
I am considering a set of these in 18x9's. Doesn't look like anybody on this forum has them. I have seen these wheels on a new Tuscany F150 and really liked the looks of this wheel.

they have a +30 offset so if i understand correctly that will move my wheels out closer to the edge of the wells.
they have a load rating of 2500. Is that considered low?

 

[Rookie]

They look decent. Still don't understand offset but that number sounds extreme.

 

[Nick@Apollo-Optics]

+30 is a very conservative offset. I believe factory is +36.

 

[Blind1]

That's good looking wheel. The offset should be good.

 

[ittybittyfds]

That's good looking wheel. The offset should be good.

Backspace = 6.20
Center Bore = 87.1

its a 18x9 wheel
I plan on running 35 x 18 x 12.5

anybody who understands backspace and offset's think this is fine?
I cant find any local shop who sells the Raceline Assaults so its hard form me to test fit.

 

[Nick@Apollo-Optics]

For reference, most folks on FRF are running 0 offset method wheels. Those stick out further than the +36 stock wheels and the +30 wheels you're looking at.

 

[Hazzard]

that offset is fine to run

 

[ittybittyfds]

Ok found another set of Raceline Mamba Wheels. these are a 20' wheel with a 0 offset

does anybody have any knowledge of the Raceline Wheels and there quality?

 

[bosssho]

From everything I have read on here, and been told, like others have said...anything that's a 0-to-+30 (Most wheels I am looking at are also +30 fyi) will be fine.

Good looking wheels. Similar to KMC IMHO...

 

[boostfiend]

Just dont go negative offset. tires will go past fenders once you go negative