Picking up my Gen 1 tomorrow!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,189
Reaction score
2,678
Location
OHIO
ah ok, so fuse 27 relocation is the same issue?



those look great, easy swap i would think?

Just pry out the old ones and install those. I wired it from the puddle lamp hole. There a slight trick to getting the puddle lamps out, but I'd done that before.

I grabbed the turn signal +12V using a Posi-Tap on the rear facing signal wire, and wrapped the ground wire around the puddle lamp ground lug before I plugged the puddle lamps back in.
 
Top