NickPic83's SVT Raptor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
NickPic83

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,441
Location
Rockland County NY
mounted up a 20" led bar in the bumper. obviously need better pics but here is a quick one. this thing is bright!

2012-03-31_19-33-27_103.jpg
 
Last edited:
OP
OP
NickPic83

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,441
Location
Rockland County NY
not bad. hardest part was the splicing in the dash. i got the rigid cradle from alternative offroad that made it fairly easy.
 
OP
OP
NickPic83

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,441
Location
Rockland County NY
its supposed to be spot and flood but its mostly flood. i would say it goes as far as my 55w 6000k hid's but it def has a way bigger and brighter spread.
 
OP
OP
NickPic83

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,441
Location
Rockland County NY
new light setup. i gotta thank iron man on this. 55w HID's in headlights, 20" LED light bar, 4 projector 35w HID fog lights, on the front and 2 projector 35w HID fog lights on the rear bumper.



2012-04-14_17-52-03_918.jpg
2012-04-14_17-51-51_38.jpg
 
Last edited:
OP
OP
NickPic83

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,441
Location
Rockland County NY
very easy with your write up ironman!

i made my own bracket similar to yours for the front fogs. the led bar i used the rigid cradle(very simple install) and the rear lights i drilled out the to small pieces of frame that hangs down along side the hitch and mounted them there. ran everything in 1/2" wire loom.

hopefully getting the last of my audio parts this week and i can have my subs and amp in the truck by next weekend. probably goin to start some of the wiring tomorrow
 
Top