BRONCOBOY1
Full Access Member
RPG installation instructions are incomplete! That said it looks like they have changed the pin that installs into the stock steering knuckle or I have the wrong pins. My pin will not fit into the factory knuckle (20 thousands larger)do I need to drill out the factory knuckle or do I have the wrong pin?
Any help would be great - trying to get this together for alignment tomorrow
---------- Post added at 12:28 PM ---------- Previous post was at 12:17 PM ----------
Ok, Instructions are mis-leading but Jarret is awesome. I called and he answered on a Sunday WOW!. I have the new updated pin and need to drill the steering knucle to 5/8 all is good - thanks Jarrett!!!!
Any help would be great - trying to get this together for alignment tomorrow
---------- Post added at 12:28 PM ---------- Previous post was at 12:17 PM ----------
Ok, Instructions are mis-leading but Jarret is awesome. I called and he answered on a Sunday WOW!. I have the new updated pin and need to drill the steering knucle to 5/8 all is good - thanks Jarrett!!!!