FS: Rigid LED bars, Fox 2.5, SVC UCA, Tie Rods etc.

[Glo]

Spring cleaning in the garage. I am located in Las Vegas, but am also in SoCal and Utah fairly often.. and could arrange meeting in person. Otherwise actual shipping charges additional.



- USED SVC Upper Control Arms - Red $800 ****sold

- USED Stock spindle / steering knuckle tapped for SVC UCAs $sold

- Stock steering knuckle with Outlaw gusset kit installed sol

- USED Rigid 50" SR2 single row light bar - combo with Hyperoptics and Spectre lenses. incl. wiring. These things have a crazy throw! $800

- USED Rigid 20" E-series combo - Amber LEDs - including mount and wiring harness. Perfect for dusty conditions in stock bumper! $380 SOLD

- NEW Aurora 20" dual row light bar - looks the same like the Rigid E-series, but has 5Watt LEDs and is IP69k compared to Rigid 3watts LEDs and IP68k $pending

- NEW Aurora 40 Watts Cubes - same form factor as Rigid's D2s, just with stronger 10 Watt LEDs ( 4x 10Watts) and ip69k Have 6 of these - in spot / diffused. Bought them for a ADD Raceline bumper I never ended up getting... $65each

- NEW Aurora embedded cubes. Again a Rigid lookalikes with 10Watts LEDs ( 4x10W LEDs)
Have 4 in Diffused and with all wiring harnesses $70 each

- USED 2x Aurora 40 inch Single Row LED bars in spot pattern. Again 5W LEDs. Perfect for having them installed behind the Raptor grill! $350 each

- NEW 42" Lazerstar Atlantis single row SPOT pattern LED bar. Beautiful and high quality lightbar! $180

- USED but like new pair of KC 6.5" 70Watt HID lights in EURO driving beam. These have the same HIDs as in the KC carbon pods, used to retail for $1,100 a couple of years ago...just got brand new paint and seals thanks to no questions asked KC lifetime warranty! Amazing HIDs. Had the SPOT pattern lenses before which were insane pencil beams but the EURO pattern which is a wider spot pattern - simply perfect and much more useable imho! $400

- USED Stock FOX 2.5" Front and rear shocks, they have about 7k miles from a Scab $800 SOLD

- USED Outlaw / Alpha One Tie Rods $400 ***SOLD pending heim rebuild

- Custom made Grill mounts which allow more space behind the grill to install dual 40" LED bars, or larger radiator etc. Bolts on in stock location of the stock grill brackets. I have made 6 sets of these -3 left - $100 pair

 

[IRONMAN]

Approved

 

[Glo]

Couple more images of the items

 

[majorleaguebass]

The light bar mounts for the grille, will it allow for a whipple supercharger?

 

[Gsteve]

what dia are the kc hids

 

[Glo]

The light bar mounts for the grille, will it allow for a whipple supercharger?

I need to clarify the Grill mounts; in the picture below you can see the stock mounting bracket for the grill laying on top of the custom bracket. These bars allow to mount lights in the spaces that are usually blocked ( like the red boxes)

The stock bracket blocks the space to install any light bars longer than 30 inches. Some people mount 30" LED bars directly to the flimsy stock Grill mounts which is terrible idea if you go off roading...the bar will eventually rip off.

The custom mount allows you to position the bars super close to the grill - depending on the light bar mounts. The outline of the custom bars is tucked into a channel of the grill.

I am not sure how the whipple radiators are mounted - but I am pretty confident that the should be a solution to mount bars in a high position. From the looks of some pictures I saw from the whipple radiators - they sit pretty low. You might not be able to do the standard "low" 40 mount - depending on how wide the radiator is - but higher should be fine with the right mount for the actual light bars.

I will try to find out more about the spacing.

 

[Key]

I would so buy that 50" if I wasn't getting hooked up on an Apollo bar.

 

[Glo]

what dia are the kc hids

The KC HIDs are 6.5" lense and 8.2" total diameter.
Will try to find my original invoice to track down the model number.

 

[Deleted member 12951]

What lights are the flush mount ones? I've been looking for some amber ones to cut out and put in my rear bumper

 

[Idleone]

Good luck with the sale. Can we have more information on the 50" mount? First time I've seen one mounted in the rear like that.