Camburg/Icon Issue

[DAS RPTR]

I installed the Icon Stage 1
Springs with the Camburg 1in drop shackle. Sits perfectly but we are running into a metal on metal clanking. Looks like the Shackle is contacting the spring periodically. Anyone run into this issue?

 

[Old-Raptor-guy]

Shackle on backwards?

 

[DAS RPTR]

Camburg informed me that the shackles are on backwards We installed them like the factory ones. Unfortunately Camburg does not supply you with any instructions to inform you to do it differently.

 

[DAS RPTR]

Shackle on backwards?

Yup.

 

[Nex]

Not quite the same as I have the RPG shackles with my Icons. We ran into an issue where one of the leafs would hit the shackle on full droop. Zip tie seems to have fixed it. Planning on replacing the leafs with Deavers over the winter.

 

[thatJeepguy]

Not quite the same as I have the RPG shackles with my Icons. We ran into an issue where one of the leafs would hit the shackle on full droop. Zip tie seems to have fixed it. Planning on replacing the leafs with Deavers over the winter.

View attachment 420236
View attachment 420237
View attachment 420238

You better get some fluid film, PB surface shield or woolwax on the springs, bolts and frame Nex!

 

[Nex]

You better get some fluid film, PB surface shield or woolwax on the springs, bolts and frame Nex!

Yea, it's on my list of shiτ to do...

 

[nikhsub1]

I like the zip tie holding the entire spring assembly together

 

[Nex]

I like the zip tie holding the entire spring assembly together

Ran out of 550 cord...