JohnyPython
FRF Addict
I stole this idea from another thread and though of maybe installing one BD S1 in the hitch receiver. I was tooling around with a design and came up with this:
Overall size 6". Material maybe UHMW. Side hole would allow for a locking pin. Through hole for cooling and running the wire.
Only problem is that the body of the S1 will not fit inside a 2" receiver. So the mount would protrude 2" from the face of the hitch. I don't physically have an S1 so I used the drawing from the site.
My original plan was to flush mount 2 S1s left and right and I may stick with that. Wanted to know what everyone thinks?
Overall size 6". Material maybe UHMW. Side hole would allow for a locking pin. Through hole for cooling and running the wire.
Only problem is that the body of the S1 will not fit inside a 2" receiver. So the mount would protrude 2" from the face of the hitch. I don't physically have an S1 so I used the drawing from the site.
My original plan was to flush mount 2 S1s left and right and I may stick with that. Wanted to know what everyone thinks?