Search results

Hi All, Is the gen 2 Cobb or K&N filter the same as gen 3? Wanting to get one for my 2021 but having a hard time figuring this out. Anyone done one, and if so, which one did you use?

I know on the Gen 2's a lot of people were saying their truck ran smoother/better on 1 step cooler plugs, especially if tuned. Has anyone done this on the Gen 3? If so what plug?

Hey guys, Thought I’d give y’all my feedback on the whole deal. Got the tuner about a month ago. It was a moderate process to get the tune in the truck. You have to go under the hood and plug in modules there to install it. Not the easiest tune install I’ve ever done. Btw been tuning on...

Hey guys, Did a little touch on these wheels. Can you see what I did? Also 37 KO2's going on with out any lift. Fuel Kicker 6 17x9 +1 offset. We'll see if she rubs.... EDIT: No RUB No lift What do yall think? Of course already coated them with Carpro DLUX. They still have good concavity...

Hey Guys, Like the title says. I'm wanting to know if anyone has done this yet. Preferably on a 9" wide wheel. If so, do you get any rub when the steering wheel is at full lock? I believe the most rub prone is steering wheel at full lock while in reverse outside of off-roading. Let me know...

Hey Guys! Been waiting on this thing for months. Was 9/20 squad and it showed up 10/14 to dealer. It's 801, Moonroof, CF, Power tech and applique delete. Because I'm a detail freak, I told them not to wash, just PDI and take off plastic. Been planning the full ceramic job for months so this...

Hi All, I am wanting to simply know if a +1 on a 9" wide wheel is still the perfect fitment like it was on the GEN 2? Just a hair of poke but not really. For example below. In other words are the offsets the same gen 2 vs gen 3?

Hi All, Up for sale is the OEM hood vent and fender vents from my 2020 late production build Raptor (8 months old). This is a great way to buy these parts if you need them with out your Raptors carfax getting wrecked hehe. They are nearly mint cont and have been ceramic coated with Carpro DLUX...

Whats up guys! First of all big shout out to Bruce @Hush Car Audio and Noah @The Car Stereo Company Boy has this been a project! So it all started with @Oldfart and his "basic upgrade" to the factory B&O. I thought to myself, I'd like to have a little better sound and bass in my 802A screw...

Hi All, How did you run your tweeter wires from your a-pillars to the rear of your cab? I was planning on running my power from the battery down the passenger side of the cab so was thinking that'd make me want to run the passenger tweeter wire under dash to driver side then run both together...

Hey guys, Not much info out on this one so thought I'd add some input. Overall not that bad and seems to be easier than the 2" lift version. Instructions are ok but there's not really pics. Here is the kit as it comes to you. 7 are the same and the shorty is for seatbelt. Put all studs in...

So trying to track down a noise in the cabin and I at least somewhat know where it's coming from. Think this is like worst care scenario. So the noise is coming from this vent/filter. They have like one way paper flaps on them. There's one on each side of the rear of the cabin. If I covered...

Soooo I have this noise in the drivers side back seat area that is driving me nuts!! Truck has done it since day one when empty so it's not an obvious answer. Only had it 4 weeks, new 2020. It's like a tinging/chirp/creak. Like a faint metal on metal but not heavy and not too loud. Just enough...

Just the tip. Don't think anyone has done these wheels on a Raptor yet. A lil different but should look good. Their going on tomorrow. First person to guess the wheel is awarded 5 internet points. Update1 Update 2 their on but dirty FINAL UPDATE: SO coated the beadlock to...

Hey Guys, Going to a 170 degree. I don't want to make a mess and cover belts, pullys and everything else in coolant. Has anyone just drained the radiator from the drain valve, then pulled the housing to change thermo? Would there still be a lot of coolant coming out from the housing location...

Hi all, Is there anyone out there that makes just carbon fiber tips for stock exhaust? Duel walled is much preferred and a slight angle cut would be nice but not necessary. I may or may not do a resonator delete but will prob keep the rest stock. Just got a Oxford white 2020 and looking to go...

Hey Guys, Just put on my new wheels. Haven't seen these on any Raptors yet, at least in 17 inch. They came with silver painted bead lock bolts and washers. I swapped those out with satin black because silver matches nothing on this truck. Their a +1 offset.... kinda What do yall think...

Hey guys trying to see how much the factory tire would stick out on a 0 or +1 offset wheel. Looking at 17x9 but any 9” wide will help. Show em off!

Hey guys, Have had a this 19 for about 2 months and just started monitoring CHT about 2 weeks ago. Noticed this thing runs HOT! Average is about 220 degrees in 40-50degree ambient temps. Over Christmas I was at my cabin driving through the mountains in 10 degree ambients (yes there was...