Okegg0
Active Member
Mine came with that and my tailgate is slowly coming loose... what did you use to keep it attached so I can fix mine.
What did you do to your Raptor today? (Gen2)
- Thread starter Jepper
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Mine came with that and my tailgate is slowly coming loose... what did you use to keep it attached so I can fix mine.
Those are Icon shocks and bumps and your are right it’s is a Kashima coating done by KDM Technologies.
Sent from my iPhone using Tapatalk
Just curious, but are you required to run the bump stop spacer with the gen 2 “RXT” shocks?
I am not sure which spacers are you talking about. But you are not required to have spacers to run the RXT system.
They are on your bumpstops to limit up travel with stock rear shocks. I assumed the eccentric mount icons would allow you to remove your spacers and gain an additional inch of up travel.
They look like this:
I dont think I got these with my kit and this why I got confused with your question.
are you running the Icon bumpstop kit with stock shocks?
I have a gen 1 and yes I am stock right now, so take this for what it is worth.. On my truck those little spacers will be coming out one I get RXT or a bypass rack. If you are able to remove them and safely cycle the suspension that high then you should gain some up travel.
In your photo it looks like the shiny ring is the spacer I am referring too (red arrow)
In your photo it looks like the shiny ring is the spacer I am referring too (red arrow)
I did the HDMP thing on my diff/axle and frame. Lasted beautifully through a MN winter.
Sent from my iPhone using Tapatalk
Thank you now I definitely understood what you trying to say I got confused lol. I will be removing them and testing them but that sure looks like an extra inch of uptravel. Thanks again I got to learn something new.
Sent from my iPhone using Tapatalk
No problem at all. With the eccentric mount on the Icons you should be able to use that additional up travel. May verify it on Icon’s install instructions if you get the chance though.
Similar threads
