Light bar mount questions

[Tanner505]

Hey guys I have a 50" rigid e series light bar that I want to mount on the roof and I'm liking the add mounts but im wondering were to run the wiring, I'm not really wanting to drill a hole in the roof to run the wires , what have you guys done

 

[Yukon Joe]

Hey guys I have a 50" rigid e series light bar that I want to mount on the roof and I'm liking the add mounts but im wondering were to run the wiring, I'm not really wanting to drill a hole in the roof to run the wires , what have you guys done

Most run it down the edge of the windshield on the passenger side. You can use a little bit of black silicone to hold it in place.

Yukon Joe

 

[Tanner505]

Most run it down the edge of the windshield on the passenger side. You can use a little bit of black silicone to hold it in place.

Yukon Joe

That's what I was thinking, any reason to worry about the wire being pinched in the door jam

 

[Deleted member 12951]

That's what I was thinking, any reason to worry about the wire being pinched in the door jam

If you run it down the side of the windshield in that groove then into the opening where it goes under the hood, then you are no where close to the door to cause any issues.

 

[The Car Stereo Company]

yes.

 

[Tanner505]

Is the groover you're talking about the one just behind the weather striping? In the door jam

 

[Westside Offroad Group]

Is the groover you're talking about the one just behind the weather striping? In the door jam

no its on the inside of the A pillar right next to the windshield. The wire will be laying up against the edge of the glass.

make sense?

 

[Tanner505]

no its on the inside of the A pillar right next to the windshield. The wire will be laying up against the edge of the glass.

make sense?

Sweet thanks, now the question is what light bar mounts lol

 

[Westside Offroad Group]

Sweet thanks, now the question is what light bar mounts lol

SoCal super trucks. Solid construction.


Sent from my iPhone using Tapatalk

 

[Tanner505]

I like their mounts but, I don't like the idea of putting holes in the roof of the truck, do you have to drop the headliner like the n fab mounts require for install?