Carbon Fiber Shifter through Fordparts.com

[foo.c]

Anymore? How much? You can PM me if you want.

He said he would have more, but all were sold.

It was Jon Bowen @ Juggernaut Power

 

[Ltl6pack]

Where did you find them?

Ordered mine at the dealership 3 weeks ago. It was a lot cheaper than one that was on eBay and amazon! I thought they quoted me the wrong price! Paid and left. This was the only piece of the carbon fiber package that I liked.

 

[stealthfrc]

that guy is a buddy of mine and where i got mine. he is local to me. he is trying for more but don't hold your breath. he didn't even think he would get the 3 he did. they may show up randomly one day tho.

 

[Ltl6pack]

You have to remove the console in order to get the boot up. If you pull it downward your going to break the clips

The two clips that are at the bottom of the shifter opposite of the two mounting screws, is that what holds the boot up?

 

[byz250f]

how much is this?

 

[mcasseba]

Just added a cf shifter with no other cf in the interior? Why?

 

[Ltl6pack]

how much is this?

They are not that bad straight from Ford. Took 3 weeks to get it.

 

[Ltl6pack]

Just added a cf shifter with no other cf in the interior? Why?

No real reason other than I wanted CF when I ordered and had to take it off to get truck built. At that time I only wanted the shifter, but had to have it all. It saved me 927.50$ doing it this way! Also I was able to see a Raptor with the CF package and am glad I did not get it. With only the shifter knob CF it will be one of many things that makes my Raptor a little more mine!

 

[Ltl6pack]

The two clips that are at the bottom of the shifter opposite of the two mounting screws, is that what holds the boot up?

Was able to change out the shifter knob today. It only took 5 minutes!
1: I put the truck in Drive. Then set parking brake.
Shut truck off.
2 Pulled the boot up toward the shifter and using my left thumb nail pushed in on the clip below top ring on boot and used my right hand and pushed it down at the same time, on the left side of shifter. It slide down about a 1/8",
3 Then did the same on the right side until the boot was free from knob.
4 With the shifter in drive and stubby Phipps screw driver removed the two screws on the front of the knob, knob is is now free, then used a long slim straight screw driver to release the wiring clip. Pulled old knob off.
5 Then installed the CF knob! Checked that everything worked before pulling the boot back up over clips!
Took longer to write this up than to change it out!

 

[jusdach]

Looks like part number HL3Z7213HA is available to ship right now for $57.53 from fordparts.com. Can you confirm this is the Carbon Fiber shift knob you have pictured and no additional hardware is needed to replace the stock leather shifter?