Changing Bulbs out to LED

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RC51TOFUMAN

Full Access Member
Joined
Feb 21, 2013
Posts
848
Reaction score
263
Location
in Thee OC
My truck is in the garage cooling down....
I have New LED's to swap out
Front Parker Light
Turn Signal Bulbs

Any tips from you fellas that have already done this mod? Any Tips in regards to the Best way to access the bulbs?
- from the engine bay?
- from the bottom of the truck?

all tips welcome.....

thanks in advance
 

Fred

FRF Supporting Member
Supporting Member
Joined
Sep 3, 2011
Posts
7,432
Reaction score
2,157
Location
Richmond, VA
The turns are gone to be a pain unless you use resistors...even then the gains are minimal with the turns...
 
OP
OP
RC51TOFUMAN

RC51TOFUMAN

Full Access Member
Joined
Feb 21, 2013
Posts
848
Reaction score
263
Location
in Thee OC
I can't access the Corner Marker light.
Having a tough time from the Bottom of the fender well.
Does anyone know if this bulb just pops out...or Counter Clock turn for OUT and Clockwise turn for IN ?

I did the turn signals with No issues (no hyperflash etc)

thanks in advance
 

IRONMAN

Well-Known Member
Joined
Jun 21, 2010
Posts
9,043
Reaction score
2,399
Location
MICHIGAN
I can't access the Corner Marker light.
Having a tough time from the Bottom of the fender well.
Does anyone know if this bulb just pops out...or Counter Clock turn for OUT and Clockwise turn for IN ?

I did the turn signals with No issues (no hyperflash etc)

thanks in advance

Best way is to remove your headlight.
3 bolts and a plastic like pin.

Here is my video which shows how to remove.

Installation of Sequential turn signal PART 1 - YouTube
 
OP
OP
RC51TOFUMAN

RC51TOFUMAN

Full Access Member
Joined
Feb 21, 2013
Posts
848
Reaction score
263
Location
in Thee OC
i didn't realize 3 bolts....would save alot of wear/tear on my hands...getting torn up in tight spaces
 

Raptor911

FRF Addict
Joined
Aug 9, 2012
Posts
4,690
Reaction score
2,252
Location
Ashburn, VA
even once you remove the 3 bolts it is still not easy to remove the headlights as they are held in by tabs. Regardless make sure you pull them straight out and not at an angle. You do not want to break the guides. You will see what i am talking about when you have the lights removed. :)
 
Last edited:
Top