Search results

The shock doesn't affect the ride height. It only affect how the springs bounce/rebound when you hit bumps, etc.

Brand new springs up front, 3 year old springs in the back...sounds like your stock rear springs have sagged a bit. At least, that's my guess.

According to Discount Tire...maybe only this particular size, though?

Haven't the AT3Ws been discontinued?

I'm not sure how I missed that...I thought I'd read through the entire thread when I subscribed to it a couple years ago. I must not have, though. Anyway, I do have an MPT tune, so that must be why VDM isn't there. When I get a chance, I'll take it back to stock, run the VDM calibration...

Well, I broke down and bought a new adapter, and I'm still having the same problem. I've tried it with the truck running, and without the truck running but just having the ignition on. VDM doesn't show up in any of the screens (upon first connection, or on the 'Tests' screen, or in the 'Select...

I just realized that I never downloaded a license for ForScan on this new computer, so I was hoping that might have been the problem as to why VDM wasn't showing up in the list of modules. Went ahead and downloaded the license, loaded the key, etc, and....still nothing. Here's a screenshot...

I attempted to do the recalibration today with ForScan V2.3.51, but I'm not seeing 'VDM' in the list of modules on the 'Select PIDs dialog' screen. Here are some possible reasons I'm thinking it's not being displayed: This is the first time I've connected my OBDII reader to my new (Windows 11)...

So the software update means we’ll no longer be able to open the tailgate at all if the truck is running? I realize that eliminates the problem, but it seems more of a bandage than an actual fix. I’d still like to be able to open the tailgate while the truck is running (especially if I’m...

Assuming the truck was parked in your path, and you came across it at night, yes, it seems that your lights were sufficiently bright enough that you were able to see the truck before you crashed into it. Other than that, there's no way to tell from a picture how bright anything in the picture...

Yeah, I'm guessing/hoping there's some sort of plug/harness inside the mirror that I can disconnect that will allow me to get the LED signal (which I'm hoping is just 12VDC). I could then see about adding another LED similar to what they did. I would just temporarily attach it at first, to see...

Anyone (@FordTechOne, maybe?) have any ideas if I can just disconnect the existing LED and replace it with a different one that could be mounted in a different location? Or would that screw with some other signal, etc?

Just a data point...when I dropped off the truck, they said they wouldn't need to pull the body. Everything went smoothly, and they finished in 3-4 days. It sounds SO much better now!

I just got mine back from the dealership after having the work for FSA 21N03 done. Took them 3 or 4 days, but I've been waiting for 10 months for them to get me in for the work. They replaced the phasers (and misc associated gaskets, bolts, seals, etc), refilled the anti-freeze and oil, and...

I've noticed that if I just give a quick glance to my mirror, especially during a bright day, or when driving at night and there's a lot of additional traffic around, that it's hard to immediately tell that my BLIS LED is on. It's not that it's broken, or that it doesn't work as well as it used...

I do as low as possible on the smoker (usually 160ish, but it climbs about 180 depending on the weather...easier to keep lower smoker temps when the weather isn't as hot), and it usually takes 2-3 hours or so. At least 2 hours for sure, I'd say, and then start checking every half hour for it to...

I make jerky on my smoker... here's what I do: Partially freeze the unsliced meat, maybe for an hour or so, and then pull it out and slice it right away. You don't want it rock hard so that your knife won't go through it, but the more frozen it is (up to a point), the easier it is to get...

Here's a list of everything I can think of: 3 sets of lights in the front bumper, connected to upfitter switches. 1 set of ditch lights on the A-pillars, connected to an upfitter swith. 1 set of reverse lights mounted near the rear tow hooks, connected to an upfitter switch. These wires run...

My dealership has finally (9 months after I brought it in for the 21B10 PCM reprogram and it didn't fix the problem) gotten me scheduled to have the cam phasers replaced under 21N03 next week. I've heard that's going to require the body to be separated from the frame. Is that true? If so, how do...

8.3 cents per gallon?!? Hmm...how do I travel down there with a few (or more) thousand gallon tanks, fill them up, and come back? The trip could basically pay for itself!

That manual excerpt was from a 2019 F-150, though, which clearly must have a headlight centerline height of >35", right? So, why doesn't that mention anything about the -2"? Just to be clear, I'm not saying I disagree with your method or don't think it's correct, I'm just stating that I still...

Did I miss it, or do those instructions not mention anything about having the beam 2” lower than the center of the headlights, though? It clearly says to adjust the headlights so that the top of the headlight beam is at the same level as the reference line (which is marked at the same height as...

Oh, I see...so, basicaly the same as what I mentioned about the video I'd seen, where you actually pull your vehicle up to the wall and mark the top of the beam.

What do you mean by "measure top of the beam to top of the beam"? I once saw a video about headlight alignment, and it basically had you pull up close to the wall and mark the top of the beam, and then back away a certain distance and have you adjust the headlights so that they were somewhere...

This might be a stupid question, but if they have to pull the body off of the frame, what does that mean as far as any prep work I have to do before the dealership removes the body? Will the fact that I've hoooked up things like the upfitter switches (using the wires under the hood near the...