Tell me what I'm doin wrong! Wired up a pair of led ring / 55watt halogen on each side of the bumper total of 4 55watt lamps. Wired the LEDs to aux3 and they worked great! The 55 watts are wired to the aux1 switch. When I turn on the the aux1 switch it blows the fuse! So I started taking the lamps out one by one because I thought it was drawing to much power. Aux 1 won't even light one lamp! I wired the hot side to aux1 and the negtive side to the negative on the bat. I took them all out but when I hold wires direct to batt they light up! I just don't get it! any ideas? Each fog lamp has three wires hot for the led, a hot for the 55watt, and they share a ground. Any help would be greatly appreciated!