Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Registered members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
RAM TRX - TRX-Forum.com
Bronco Raptor - BroncoRaptorForum.com
Forums
Ford Raptor Forums - General Information
Ford Raptor Recalls | TSB's | SSM's
TSB 10-24-1 5.4L Surge When Cold
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="pirate air" data-source="post: 202800" data-attributes="member: 27"><p>TSB 10-24-1</p><p></p><p>12/16/10</p><p></p><p>5.4L 6R80 4X4 - SURGE WHEN COLD ONLY</p><p></p><p>FORD:</p><p>2010 F-150</p><p></p><p>ISSUE</p><p>Some 2010 F-150 4X4 vehicles equipped with 5.4L engine and 6R80 transmission built on or before 8/15/2010, may exhibit a 100-200 RPM surge when cold only. This condition may be present at road speeds between 25-35 MPH (40-56 Km/h), engine speed between 950-1100 RPM only and will not be present once transmission fluid temperature reaches 104 degrees F (40 degrees C).</p><p></p><p>ACTION</p><p></p><p>Follow the Service Procedure to correct the condition.</p><p></p><p>SERVICE PROCEDURE</p><p></p><p>1. Reprogram the powertrain control module (PCM)/transmission control module (TCM) calibration using IDS release 69.01 and higher. This new calibration is not included in the VCM 2010.9 DVD. Calibration files may also be obtained at the website.</p><p> </p><p>NOTE THE TCM CANNOT BE INDEPENDENTLY REPROGRAMMED.</p><p></p><p>2. Reprogram using the PMI function to ensure that engine and transmission calibrations are updated to the latest level simultaneously.</p><p></p><p>a. Verify that the TCM Calibration is:</p><p></p><p>AL3P-7J104-BD for F-150 4X4.</p><p> </p><p>b. Select the following from the IDS tool:</p><p></p><p>(1) Toolbox</p><p> </p><p>(2) Powertrain</p><p> </p><p>(3) OBD Test Modes</p><p> </p><p>(4) Mode Level 9 Vehicle Information</p><p> </p><p>(5) TCM Cal Part Number</p><p> </p><p> </p><p> </p><p>3. Clear TCM keep alive memory (KAM) and adaptive table</p><p> </p><p>NOTE IT IS CRITICAL THAT 1CM KAM BE CLEARED FOR THIS PROCEDURE TO BE FULLY EFFECTIVE</p><p></p><p>a. Using IDS:</p><p></p><p>(1) Open Toolbox</p><p> </p><p>(2) Choose Powertrain Then Choose 1CM</p><p> </p><p>(3) Choose Reset KAM</p><p> </p><p> </p><p>b. Using PDS:</p><p></p><p>(1) Choose all Tests and Calibrations</p><p> </p><p>(2) Scroll down the menu and choose reset TCM KAM</p><p> </p><p> </p><p>NOTE FOR PDS, RESET TCM KAM IS NOT THE SAME AS CLEAR TRANSMISSION ADAPTIVE TABLES, WHICH IS UNDER THE POWERTRAIN - TRANSMISSION MENU TREE.</p><p></p><p>NOTE UNHOOKING THE BATTERY WILL NOT CLEAR THE TCM KAM. IT IS CRITICAL THAT TCM KAM BE CLEARED PRIOR TO RELEARNING THE ADAPTIVE TABLES FOR THE TRANSMISSION.</p><p></p><p>NOTE DO NOT CLEAR THE PCM KAM.</p><p></p><p>4. Verify that the transmission fluid temperature (TFT) PID is above 175°F (80 °C). If it is not at 175 °F (80 °C), drive unit approximately 3 miles (5 Km) to reach temperature. TFT must be at 175 °F (80 °C) or above before proceeding to Step 5.</p><p> </p><p>NOTE PERFORM ADAPTIVE SHIFT STRATEGY LEARN ON LEVEL SURFACE ROAD.</p><p></p><p>5. Drive unit to perform adaptive shift strategy learn.</p><p></p><p>a. Accelerate from a stopped position with light throttle to 15 MPH (24 Km/h) and remove foot from accelerator pedal.</p><p> </p><p>b. Brake very gently to a complete stop, allow at least six (6) seconds.</p><p> </p><p>c. Repeat steps (a-b) five (5) times in the dealership parking lot or similar setting.</p><p> </p><p>d. Accelerate from rest with light throttle ensuring that the 1-2, 2-3 and 3-4 shifts occur at engine speeds between 1700-2000 RPM</p><p> </p><p>e. Continue to accelerate until you achieve 50 MPH (80 Km/h) or the 5-6 upshift.</p><p> </p><p>f. Brake gently to a complete stop and hold foot on brake for ten seconds.</p><p> </p><p>g. Repeat steps (d-f) three (3) times</p><p> </p><p> </p><p>NOTE SEVERAL DAYS OF DRIVING ARE REQUIRED FOR THE TRANSMISSION TO FULLY ADAPT.</p><p></p><p>WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage </p><p>IMPORTANT : Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.</p><p></p><p>OPERATION DESCRIPTION TIME</p><p></p><p>102401A 2010 F-150 4X4 5.4L 3V 1.0 Hr.</p><p> 6R80 Transmission: Check</p><p> DTCs, Reprogram The</p><p> PCM And TCM, Includes</p><p> Time To Clear KAM And</p><p> Perform Road Tests (Do</p><p> Not Use With Any Other</p><p> Labor Operations)</p><p></p><p>DEALER CODING</p><p> CONDITION</p><p>BASIC PART NO. CODE</p><p>RECAL 42</p></blockquote><p></p>
[QUOTE="pirate air, post: 202800, member: 27"] TSB 10-24-1 12/16/10 5.4L 6R80 4X4 - SURGE WHEN COLD ONLY FORD: 2010 F-150 ISSUE Some 2010 F-150 4X4 vehicles equipped with 5.4L engine and 6R80 transmission built on or before 8/15/2010, may exhibit a 100-200 RPM surge when cold only. This condition may be present at road speeds between 25-35 MPH (40-56 Km/h), engine speed between 950-1100 RPM only and will not be present once transmission fluid temperature reaches 104 degrees F (40 degrees C). ACTION Follow the Service Procedure to correct the condition. SERVICE PROCEDURE 1. Reprogram the powertrain control module (PCM)/transmission control module (TCM) calibration using IDS release 69.01 and higher. This new calibration is not included in the VCM 2010.9 DVD. Calibration files may also be obtained at the website. NOTE THE TCM CANNOT BE INDEPENDENTLY REPROGRAMMED. 2. Reprogram using the PMI function to ensure that engine and transmission calibrations are updated to the latest level simultaneously. a. Verify that the TCM Calibration is: AL3P-7J104-BD for F-150 4X4. b. Select the following from the IDS tool: (1) Toolbox (2) Powertrain (3) OBD Test Modes (4) Mode Level 9 Vehicle Information (5) TCM Cal Part Number 3. Clear TCM keep alive memory (KAM) and adaptive table NOTE IT IS CRITICAL THAT 1CM KAM BE CLEARED FOR THIS PROCEDURE TO BE FULLY EFFECTIVE a. Using IDS: (1) Open Toolbox (2) Choose Powertrain Then Choose 1CM (3) Choose Reset KAM b. Using PDS: (1) Choose all Tests and Calibrations (2) Scroll down the menu and choose reset TCM KAM NOTE FOR PDS, RESET TCM KAM IS NOT THE SAME AS CLEAR TRANSMISSION ADAPTIVE TABLES, WHICH IS UNDER THE POWERTRAIN - TRANSMISSION MENU TREE. NOTE UNHOOKING THE BATTERY WILL NOT CLEAR THE TCM KAM. IT IS CRITICAL THAT TCM KAM BE CLEARED PRIOR TO RELEARNING THE ADAPTIVE TABLES FOR THE TRANSMISSION. NOTE DO NOT CLEAR THE PCM KAM. 4. Verify that the transmission fluid temperature (TFT) PID is above 175°F (80 °C). If it is not at 175 °F (80 °C), drive unit approximately 3 miles (5 Km) to reach temperature. TFT must be at 175 °F (80 °C) or above before proceeding to Step 5. NOTE PERFORM ADAPTIVE SHIFT STRATEGY LEARN ON LEVEL SURFACE ROAD. 5. Drive unit to perform adaptive shift strategy learn. a. Accelerate from a stopped position with light throttle to 15 MPH (24 Km/h) and remove foot from accelerator pedal. b. Brake very gently to a complete stop, allow at least six (6) seconds. c. Repeat steps (a-b) five (5) times in the dealership parking lot or similar setting. d. Accelerate from rest with light throttle ensuring that the 1-2, 2-3 and 3-4 shifts occur at engine speeds between 1700-2000 RPM e. Continue to accelerate until you achieve 50 MPH (80 Km/h) or the 5-6 upshift. f. Brake gently to a complete stop and hold foot on brake for ten seconds. g. Repeat steps (d-f) three (3) times NOTE SEVERAL DAYS OF DRIVING ARE REQUIRED FOR THE TRANSMISSION TO FULLY ADAPT. WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT : Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part. OPERATION DESCRIPTION TIME 102401A 2010 F-150 4X4 5.4L 3V 1.0 Hr. 6R80 Transmission: Check DTCs, Reprogram The PCM And TCM, Includes Time To Clear KAM And Perform Road Tests (Do Not Use With Any Other Labor Operations) DEALER CODING CONDITION BASIC PART NO. CODE RECAL 42 [/QUOTE]
Insert quotes…
Verification
Post reply
Members online
Telecaster480
jAKe47
HAP
Dev
pat247
bakwaas4eva
Original Bronco
debauch
blazn5667
Gumby
2022 Ruth
supratoy
NJ2020
rlawdawg
Frogger22
FossilFuel
Speedhunter
Spike Spiegel
FP_RPTR
Latchkey Kid
Nick@Apollo-Optics
brunorulez
silvertige
tegtitan10
vill
ToadSmasher2K1
HTXShadow
ReluctantRaptorGuy
MurderedOutSVT
Jepper84
gjw535
Skyfrog
tominphx
Jay_P
decodo
MZRaptor72
RobSpring661
elking
GooseTuned
billw
Dunn
ausmark
mprice1234
scottybs
Ruger
Rptrrob702
Reptar854
awd5906
HeyItsARaptor
MORaptor
... and 19 more.
Forum statistics
Threads
93,198
Posts
1,955,821
Members
56,485
Latest member
bjorn-dpc
Forums
Ford Raptor Forums - General Information
Ford Raptor Recalls | TSB's | SSM's
TSB 10-24-1 5.4L Surge When Cold
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top