GEN 2 Tailgate Options (Other Than Appliqué)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WHYUMAD

Full Access Member
Joined
Feb 19, 2012
Posts
848
Reaction score
305
Location
New Orleans, LA
I’ve been looking at options other than no appliqué versus appliqué. The Roush Raptors come with a vinyl decal, which doesn’t look too bad IMO.. but I think I found another route to go.

I’m thinking about purchasing a new 2017 F-150 Tailgate (no F-150 stamp) w/o the appliqué option. I will then transfer all the stuff off of my 2018 tailgate (has F-150 stamped into it) to the 2017 tailgate & go with this appliqué:

aaceb01ff6ea077e23b0fa1380b3dbb8.jpg

f93ef52777c62b363c394328eef02035.jpg

I think it will look nice & clean. Also, the reason for going to a 2017 tailgate isn’t just to eliminate the F-150 stamping, but the actual center spot for the 2017 is different than the 2018-2019 in size, so you are unable to use any of the appliqués like the one I posted & imo, the ‘18 & up look goofy with such a small “bowtie-esq” piece blacked out.

The only other option is buying a 2017 tailgate & the appliqué, which the appliqué is ridiculously priced at over $1200. The appliqué I posted is around $450, so all in, I’d be ~$500 for a tailgate, plus prep & paint, plus the applique... $1200 (the price of just the applique [emoji849]). The Ford emblem is already paint-to-matched (leadfoot grey), so I think it’d look good.

Opinions? I can just bite the bullet & get the appliqué.. just kicking around options.
 
OP
OP
WHYUMAD

WHYUMAD

Full Access Member
Joined
Feb 19, 2012
Posts
848
Reaction score
305
Location
New Orleans, LA
Also, for comparison, this would be the same appliqué for a 2018... it doesn’t look IMO. Too thin in the middle (aka “bowtie-esq”) & no option for using the Ford oval emblem.

559572ac6bd2eeee7bb3cb6e3c4f2830.jpg
 
Last edited:

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,579
Reaction score
3,061
Location
ME
I’ve been looking at options other than no appliqué versus appliqué. The Roush Raptors come with a vinyl decal, which doesn’t look too bad IMO.. but I think I found another route to go.

I’m thinking about purchasing a new 2017 F-150 Tailgate (no F-150 stamp) w/o the appliqué option. I will then transfer all the stuff off of my 2018 tailgate (has F-150 stamped into it) to the 2017 tailgate & go with this appliqué:

aaceb01ff6ea077e23b0fa1380b3dbb8.jpg

f93ef52777c62b363c394328eef02035.jpg

I think it will look nice & clean. Also, the reason for going to a 2017 tailgate isn’t just to eliminate the F-150 stamping, but the actual center spot for the 2017 is different than the 2018-2019 in size, so you are unable to use any of the appliqués like the one I posted & imo, the ‘18 & up look goofy with such a small “bowtie-esq” piece blacked out.

The only other option is buying a 2017 tailgate & the appliqué, which the appliqué is ridiculously priced at over $1200. The appliqué I posted is around $450, so all in, I’d be ~$500 for a tailgate, plus prep & paint, plus the applique... $1200 (the price of just the applique [emoji849]). The Ford emblem is already paint-to-matched (leadfoot grey), so I think it’d look good.

Opinions? I can just bite the bullet & get the appliqué.. just kicking around options.
Just my opinion but I think it would look better without the Ford oval in the middle.
I may be in the same boat in the near future. I'm thinking about ordering a 2020 and also looking at a few 2019's out of state. I can no longer get a 800A with the applique like I did on my 2017 800A.
I noticed 2019 appliques are a little cheaper but I don't know if it will fit a 2017 tailgate? https://www.ebay.com/itm/2019-F-150...258265?hash=item287cba0799:g:d~oAAOSwKltcyw7K
 
OP
OP
WHYUMAD

WHYUMAD

Full Access Member
Joined
Feb 19, 2012
Posts
848
Reaction score
305
Location
New Orleans, LA
Just my opinion but I think it would look better without the Ford oval in the middle.
I may be in the same boat in the near future. I'm thinking about ordering a 2020 and also looking at a few 2019's out of state. I can no longer get a 800A with the applique like I did on my 2017 800A.
I noticed 2019 appliques are a little cheaper but I don't know if it will fit a 2017 tailgate? https://www.ebay.com/itm/2019-F-150...258265?hash=item287cba0799:g:d~oAAOSwKltcyw7K

The 17-19 tailgates with appliqués seem to be the same, so is the appliqué actually different for the ‘19? Thanks for posting that though, makes going the appliqué route more tempting.
 

91Eunos

Full Access Member
Joined
Oct 18, 2018
Posts
645
Reaction score
908
Location
Hill country, Tejas
I did a ‘17 tailgate to get rid of the appliqué and get the step; threw a custom badge on while I was at it:

i-WbVX4F2-XL.jpg

Avoiding the f-150 stamp on a direct replacement for my ‘18 Leadfoot was a bit of inadvertent excellence in my opinion.

i-n97bBHX-X4.jpg

And thanks for the reminder to bump the ad for my original non-step tailgate with appliqué in the flea market! :deal:
 
Last edited:
OP
OP
WHYUMAD

WHYUMAD

Full Access Member
Joined
Feb 19, 2012
Posts
848
Reaction score
305
Location
New Orleans, LA
I did a ‘17 tailgate to get rid of the appliqué and get the step; threw a custom badge on while I was at it:

i-WbVX4F2-XL.jpg

Avoiding the f-150 stamp on a direct replacement for my ‘18 Leadfoot was a bit of inadvertent excellence in my opinion.

i-n97bBHX-X4.jpg

And thanks for the reminder to bump the ad for my original non-step tailgate with appliqué in the flea market! :deal:

I may be interested.. how much? Located in Louisiana. Shipping quote to zip code 70123 & it’d be to a business, so palleting it is fine.

Btw, that looks clean. Makes me second guess wanting to go to the applique... worst case, I can swap between tailgates until I choose one & just sell the other. [emoji23]
 
Top