FS - Rear Stock Shocks

[mike.s]

From a scab. About 50k miles on them, need a rebuild. Asking for $350 for the pair. Located in Los Angeles, CA. Buyer pays shipping.

 

[KaiserM715]

Approved.

 

[CoronaRaptor]

Those look pretty clean for 50k, glws

 

[mike.s]

Simple Green works wonders. Question, will these work on a screw or no?

 

[FireLT]

Yes, they are the same size, but are valved slightly different.

 

[mike.s]

Yes, they are the same size, but are valved slightly different.

Ok, so someone with a screw could buy these and then have them revalved during the rebuild?

 

[FireLT]

No clue..... I did some research when I was buying take off rears, thats how I know about the different internals.. maybe post up the question in the suspension forum.

 

[goneFXcrazy]

What would be the effect of putting SCAB valved shocks on a SCREW? Squishier feel, faster compression, body roll? Anything like that?

 

[CoronaRaptor]

What would be the effect of putting SCAB valved shocks on a SCREW? Squishier feel, faster compression, body roll? Anything like that?

Lay bets that you would only notice a difference during some hard offroading

 

[KillerKyle]

Now I'm curious about rebuilding theses? They should be like a standard shock to rebuild? just curious how you access the bypass ports to swap out shims or if your just change the shim stack on the piston and not mess with bypass ports?