Ford Emblem on Non-Applique Tailgate

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wesleywest

Member
Joined
Feb 18, 2017
Posts
12
Reaction score
4
Anybody know where I could find a replacement emblem that matches the "F150" and "Raptor"

The big blue emblem just doesn't match to my eyes. I've seen some on eBay for the 2016 model year F150, but I'm not sure those will work.

Any help is much appreciated.
 

Attachments

  • FullSizeRender.jpg
    FullSizeRender.jpg
    101.5 KB · Views: 528

Jeff-Ohio

Full Access Member
Joined
Nov 3, 2016
Posts
909
Reaction score
451
Location
Cincinnati
Anybody know where I could find a replacement emblem that matches the "F150" and "Raptor"

The big blue emblem just doesn't match to my eyes. I've seen some on eBay for the 2016 model year F150, but I'm not sure those will work.

Any help is much appreciated.

I ordered duplicate "Raptor" emblems from the dealer and installed them on each front door. I was charged $30 something for each "Raptor" emblem. Keep in mind that I am talking about the small emblem on the tailgate, not the vinyl graphics.
 
Last edited:

ron.bumpus

Full Access Member
Joined
Jun 19, 2015
Posts
116
Reaction score
35
Location
North, NJ
Anybody know where I could find a replacement emblem that matches the "F150" and "Raptor"

The big blue emblem just doesn't match to my eyes. I've seen some on eBay for the 2016 model year F150, but I'm not sure those will work.

Any help is much appreciated.

I ordered a gloss black badge with silver lettering on it on Ebay
downatthebuilding on eBay
 

TheWolf

Full Access Member
Joined
Nov 15, 2013
Posts
970
Reaction score
1,337
Location
Spokane, Washington
How difficult is the swap?....Are there holes with double sided sticky tape?

I don't know how the emblem on the '17 is attached, but the '14 only had two posts with metal retainer clips, and you could remove it by getting a small screwdriver under and and pulling straight back.

My guess is the '17 has alignment posts and foam tape, as this was the case on the '16 Explorer. For that one, I used fishing line to "saw" through the tape, and since it had alignment posts, I had to saw with the line from all four directions.
 

crash457

I'm Batman
Supporting Member
Joined
Aug 4, 2016
Posts
2,374
Reaction score
1,911
Location
St. Louis, MO
How difficult is the swap?....Are there holes with double sided sticky tape?

There are alignment posts, clips and adhesive. It's not to hard to remove.

Line the area around it with masking tape to prevent damage to the paint
Heat the area to soften the adhesive
Pry up with a trim tool
 
Top