If bringing it to the dealer makes more sense to you then so be it but more often than not dealers are telling customers that there trucks are up to date when they arent. I recently updated a 21 Lariat that originally showed that it needed 13 updates. When it was all said and done i did a total...
I have FDRS if anyone needs me to run their vin.
I stay pretty busy so it may take me a couple days to get back with you.
Also if anyone is located in South Louisiana I can perform the updates for you. Cost will be…. Up to 4hrs = $200, 4hrs plus = $300. Depending on the amount of updates...
I saw a thread the other day someone was able to use Forscan to have the grill lights come on with the DRLs. IIRC the front flare amber lights also were on.
I found on the Forscan spread sheet how to turn the parking lights on with the DRLs but this not only turns on the grill lights and front...
I know what a KC is and how it works. I had one on my Gen2 Lightning Swapped F150. It only works on water to air intercooler systems! Unless a company comes out with a water to air intercooler system for the Raptor a KC will not work ever.
Air to air intercoolers are more efficient on the...
The KC uses your AC to chill the Intercooler water in a system with a water to air intercooler. The Raptor has an air to air so the KC won’t work. If there was a company that made a water to air intercooler system for this truck then you could but I’m unaware of anyone making that.
Just a FYI up until last week i was under the impression that 23031 Rev 713 was the latest update but a buddy picked up a 23 Raptor Wednesday and its currently at 23045 Rev 732.
Wayne
Forscan can be used to activate DRLs. If you have OEM HIDs the only options for DRLs is the turn signals. Whenever the truck is in gear, the turn signals will come on bright.
If you have OEM Halogen headlights you can have the low beam (@ 50% power iirc) or turn signals as DRLs.
If you don't...
Not the weight of a raptor but heavier than the ZL1 & Mustangs but there are many Whippled 2018 F150 trucks out there that are producing 10sec time slips doing boosted 4X4 launches and no issues. One in particular that comes to mind is the "Undertaker". His youtube username is Boosted F-150. He...
If my understandings of what the differences of Oil Separator(Catches & Holds Oil/Contaminates) and AOS(Catches & Drains Oil/Contaminates Back Into Motor) is correct, I would HIGHLY suggest you NOT run a AOS.
Just to make things clear I have a 2013 5.0L, although a completely different engine...
After reading @Ruger comment about the benefits of the Mag-Hytec, I knew before I even scrolled down that someone was going to post the Banks videos and bam the very next post.
Although the videos do show that the design isn't the best I personally think its nothing to worry about. Change the...
Its good to see people that clearly normally don't turn wrenches getting out there and doing something on there vehicles. Although you got it done I was nervous for you the entire time.
A couple notes for the next time you do front end suspension work. I was glad to see you finally disconnected...
Make sure you apply dielectric grease to all the plugs. Most importantly the plug that attaches the TRS Harness to the factory passenger side headlight plug. The seal that comes one the TRS isn't the best and allows moisture to enter the plug causing it to corrode. I would suggest dielectric...
Have you contacted Crown about the braided brake lines? Im pretty sure they can make any thing you need.
If not, contact Bonaco Inc. I did a rear disc brake conversion on my Ranger years back and nobody had the hoses i needed in stock. Called Bonaco up, gave them the specs of what i needed and...
Forscan actually allows access into MORE modules than what Fords IDS system allows! It also allows more changes within those modules as well.
Also a page or two back it was mentioned about changing tire sizes and how that affects the NAV position. It all had to do with the Dead Reckoning...
They have also blown up alot of motors. Its been documented many times that the owner is a complete ass hole. Cursing out his customers, not returning emails, ignoring calls/text, etc...
Theres a reason they have changed names so many times.
Wayne
I went to Hennesseys site to see if they had any build pics, was curious how they did the rear suspension and two things jumped out at me quick. Quality Shit Right There LOL.
When they cut the bed to extend it all they did was rivet a piece of sheet metal in between the front and rear...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.