Correction. I am referring to the brackets that go under the hood to mount them in front of the A pillar. Those don’t come with the lights but the brackets you see in the picture come with the lights.
Baja design LP6s. Used on my truck for 6 months. I sold my gen 1 raptor and now selling these. Lights only. No mounting bracket or wiring harness.
600 shipped for both.
Having a small problem and if anyone can help let me know...
Update. I went ahead and tapped into the blue and white wire. I have the ambers working fun off the six switch 4. I have not been able to get the clear Baja light to come on. They only thing that I left unplug was the existing harness...
Update. I went ahead and tapped into the blue and white wire. I have the ambers working fun off the six switch 4. I have not been able to get the clear Baja light to come on. They only thing that I left unplug was the existing harness to OEM third brake light. I was assuming I did not...
Do I need to connect the existing harness to the GJ light. If so I have no clue where to connect. Please view pictures to see what I am talking about.
2013 raptor.
thanks for the help
This is a huge thread and I have read it, but can't seem to find how you tap in the white reverse light. I got the package that lights up when put in reverse.
comments from a youtube video talks about hooking up the white third brake light to the pass through wires on a Gen 2. I was under...
Just a quick question on wiring lights to upfitter.
The Baja Designs harness has four wires. I am wiring up a LP6 pro
How do Incorporate the amber backlight into the switches. I am going to put high and low beam on switches 1 and 2 respectively.
ground
high beam
low beam
amber backlight
Hello...I bought two LP6 lights. They have three wires. I am assuming the yellow wire is the amber back-light. Quick question....I am supposed to wire the red and yellow to the same upfitter?
I will be using aux 1 that has 30amps. If red and yellow are going to same upfitter do the...
I changed my rear diff cover from factory to dana spicer which has two fill holes.
I put three quarts of amsoil rear diff oil and still don't have it dripping out of the lower fill hole.
Is is ok to top off the rear diff with another diff oil with the same weight?
This I found on another forum
SSM 3424 - F-150 SVT RAPTOR BUMPER AND GRILLE PAINT INFORMATION
2010 F-150 RAPTOR SVT INFORMATION FOR PAINTED BUMPERS AND GRILLE. BUMPER COLOR IS STERLING GRAY, PAINT CODE UJ. MOTORCRAFT EXTERIOR LACQUER TOUCH-UP PAINT WITH 2-IN-1 BRUSH-IN-TUBE/PEN TIP TO REPAIR...
This was from a body shop camera that matches paint.
The following mixtures are for DuPont Nason paint only and based on a 4oz. mix.:
Bumper--
430-01 H.S. Black 3.4 grams
430-45 Clean Magenta 0.5 grams
430-13 Non-Flop Blue 0.4 grams
430-09 Trans Yellow 0.4 grams
430-28 Bright White Pearl 23.4...
What did you use to polish the tips...Mine are very dirty and so far brasso and other stuff haven't done much. I started using a wire wheel brush on a drill and it is getting things off but obviously taking the chrome off as well.
Ooops.
I saw a bracket on your site that Stage3 Motorsports used to mount his LP6 and assumed it was the same. I ordered that bracket before reading that message. I will return the package unopened.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.