Recent content by castine917

Remember. That only lowers by 1 inch. Of the two inches that the tire total height is different only one inch is below the axles adding height. The other inch is above the axles.

@jdm_sixtwo, Sorry it took so long. Every time I remembered to take a picture it was dark out already. Even when I got a picture it doesn't have the aspect I wanted. The mounting of my lights blocks camera view from the mounting. On mine there is another 1/4 inch or so thick plate running...

Mine has the winch fairlead. If I remember I'll look to see how it is mounted.

The round holes are "pressed". They have an edge on the inside that I wouldn't want a light bouncing off the back of. Recessing lights from the outside and mounting hardware from the back would have to go through the metal I think as the metal isn't thick enough for just a sheetmetal screwed...

Do you know what they define as "lifted"?

Adding well placed zip-tie is good to keep a broken door from flopping in to contact with fan blades.

Michigan is the same with O vs 0

I did not know the band used this name because of C.H.I.P.S until this post.

Unfortunately, they are a some difficult to make pieces of plastic. Even the stick on covers cost as much as you're hoping to pay. A few years ago, I lost one. They were @$350(pair) at the time. I found some with lights for @$250.

They look best when they’re hauling a family or friends. Daily driving back-and-forth to work a scab looks better. I think the only solution is one of each and in every color.

I agree with swapping brake lines. My very first raptor I bought used had a caliper stick due to a brake line that would collapse. The brake line is easy to swap out and it doesn’t cost much.

I hope someone already said this. You may only be paying on one vehicle but each of those costs is increased on that one vehicle if it is a Raptor.

Until they make a instant conversion back and forth between the two you'll always want what you don't have when the time arises.

I also get the message of waiting for approval to post.